Belts, chains, cassettes and hubs
The parts of the drive that wear: Gates Carbon Drive belts, KMC chains, Shimano and SRAM cassettes, and spares for Rohloff and enviolo hubs. Tell us your bike and we can confirm the part before you order.

Belts (Gates Carbon Drive)
Gates Carbon Drive belts by tooth count. The length has to match your frame and sprockets, so send us your bike if you're unsure.

Belt Kit - Aluminum Drive, E00064
Brose's original belt replacement kit for motors with an aluminum housing.

Carbon Drive CDX CenterTrack Belt
Gates' CDX CenterTrack replacement belt, sold by tooth count, the number printed on the belt you're replacing.

Urban Arrow/ Gates Belt drive set for Performance (UA4 /G3)
A complete Gates belt drive set matched to Urban Arrow cargo bikes running the Bosch Performance motor, with the front…
Chains
Match the chain to the number of speeds on your cassette. Chains marked for e-bikes last longer under motor torque.

Four Chain - 8-Speed, 116 Links, Natural
A standard 8-speed derailleur chain from BOX, cut to 116 links and finished in natural silver.

Three Prime 9 Chain - 9-Speed, 126 Links, Polished
A 9-speed chain from BOX, 126 links, with a polished, corrosion-resistant finish.

Full Speed Ahead Team Issue 9-Speed Chain with Quick Link
FSA's Team Issue chain runs on any 9-speed drivetrain, with nickel-plated plates and chamfered edges for clean shifts.

Gates
Gates Carbon Drive is the belt-drive system on our internal-gear-hub bikes, carbon-cord belts, sprockets, and cogs…

eBike Chain

HL1 Wide Chain, Single Speed, Half Link
A silver single-speed chain where every link is a half-link.

MissingLink Connector, 2 Pairs

X Chain

Z1eHX Single-Speed eBike Chain
KMC's Z1eHX, a single-speed e-bike chain built with a half-link design.

Z410-OL Half Link - For use with 1/8 Single Speed Chains
A single offset link for 1/8 inch single-speed chains.

Chain Pin, Bag of 3

CN-HG53 Chain - 9-Speed 116 Links Gray
The Shimano CN-HG53 is an HG 9-speed chain supplied at 116 links.

CN-HG601-11 Chain - 11-Speed 126 Links Gray
An 11-speed replacement chain (Shimano CN-HG601-11, 126 links) for any 11-speed derailleur drivetrain.

CN-HG71 Chain, 6/7/8-Speed
A Shimano CN-HG71 chain for 6, 7, and 8-speed drivetrains.

CN-LG500 Chain - 11-Speed 126 Links
The Shimano CN-LG500 is the replacement chain for LinkGlide 11-speed drivetrains, supplied at 126 links with a reusable…

SLX CN-M7100 Chain - 12-Speed 126 Links Silver
Shimano's SLX 12-speed chain, 126 links, with a Quick Link to join it.

STEPS eBike Chain
The Shimano STEPS CN-E6070-9 is a 9-speed replacement chain built for ebike drivetrains.

STEPS SM-DUE61 Drive Unit Cover, City
Shimano's SM-DUE61-C city cover set for the STEPS DU-E6100 drive unit, left and right covers with screws, in black.

EX1 Chain, 144 Links
This is the SRAM EX1 chain, the 10-speed-width replacement chain for SRAM's 8-speed EX1 e-bike drivetrain.

PC-1 Single Speed Chain
A 114-link SRAM PC-1 chain in the 1/2 in x 1/8 in size used by compatible single-speed and internally geared…

PC-1031 Chain
SRAM PC-1031 is a 10-speed derailleur chain with solid pins that SRAM rates as e-bike approved.

PC-830 Chain - 6, 7, 8-Speed, 114 Links, Gray
SRAM's PC-830 is a grey 6, 7, and 8-speed chain with 114 links, and it ships with a PowerLink so you can install it…

PC-850 Chain - 8-Speed, 114 Links, Gray, 6, 7
A standard 8-speed derailleur chain from SRAM, 114 links out of the box.

Power Link for 8 Speed
A reusable master link that lets you split and rejoin a 6, 7, or 8-speed chain by hand, no chain tool required.

e91 eBike Chain
A 9-speed chain built for the extra torque an e-bike motor pushes through the drivetrain, with a hardened surface…
Cassettes + rear sprockets
Cassettes, belt sprockets and single cogs. Match the hub and the tooth count to what you have now.

Freewheel Assembly, 3-Spring
A service part for enviolo CVT rear hubs.

CDC CenterTrack Rear Sprocket, 3-Lobe SureFit, 22t
A 22-tooth Gates Carbon Drive rear sprocket for CenterTrack belt systems, in gray.

Advent Cassette, 9-Speed, 11-42t
A 9-speed, 11-42t cassette from microSHIFT's ADVENT group.

H09 Cassette, 9-Speed

Alivio CS-HG400 Cassette
Shimano's 9-speed HYPERGLIDE cassette in nickel-plated steel, in 11-32t, 11-34t and 11-36t for standard HG freehubs.

Altus CS-HG31 Cassette - 8 Speed, 11-32t, Black
The Shimano Altus CS-HG31 is an 8-speed HG cassette with an 11-32 tooth range.

CJ-C7000-5 Cassette Joint Unit
The cassette joint for Shimano Nexus 5-speed hubs.

CJ-S7000 Cassette Joint Unit
The cassette joint for Shimano Alfine 8-speed hubs.

CUES CS-LG400 Cassette
Shimano's all-steel CUES LINKGLIDE cassette, stocked in 10-speed 11-43t and 11-48t and 11-speed 11-50t for HG freehubs.

CUES CS-LG700-11 Cassette
Shimano's CUES 11-speed LINKGLIDE cassette, 11-50t, with an aluminum spider and an aluminum lockring.

Deore Cassette
Shimano's Deore CS-M4100, a 10-speed cassette built for mid-range commuter and e-bike derailleur drivetrains, in two…

Deore CS-HG50 Cassette, 10-Speed, 11-36t
A 10-speed Shimano cassette with an 11-36t range, built for the Deore M6000 group and any Shimano HG (Hyperglide)…

Deore XT CS-M771 Cassette, 10-Speed, 11-36t
A Shimano Deore XT CS-M771 10-speed cassette with an 11-36T range (11-13-15-17-19-21-24-28-32-36T).

MF-TZ510-7-CP Multi-Speed Freewheel - 7-Speed 14-34t
A 7-speed thread-on freewheel with a wide 14 to 34 tooth range, so the big 34T cog makes steep hills easier.

Nexus CJ-8S20 Cassette Joint Unit
Shimano's CJ-8S20 cassette joint, the cable-pull unit that sits on a Nexus or Alfine 8-speed hub and turns shifter…

Nexus CJ-NX10 Cassette Joint Unit
The cassette joint for Shimano Nexus 7-speed hubs like the SG-C3000.

Nexus Cog
A replacement rear sprocket for Shimano Nexus and Alfine internal-gear hubs, sold by tooth count to retune your gearing.

Tiagra CS-HG500 Cassette, 10-Speed, 11-34t
A Shimano Tiagra CS-HG500 cassette, 10-speed with an 11-34t range.

XT CS-M7 13T
A single 13t replacement cog from Shimano's 9-speed XT CS-M760 cassette, Shimano part Y1ZA13451.

XT Replacement Cog

PG Cassette

MS3 Cassette - 10 Speed, 11-42t, Silver
SunRace's MS3 is a 10-speed 11–40T cassette for a standard HG-spline freehub, with the big cogs on two alloy spiders.
Chainrings, front sprockets + cranks
Chainrings, belt sprockets, the small drive sprockets that mount on a Bosch motor, and replacement crank arms. These are specific to the motor, so match your drive unit.

Hebie Front (38t) compatible with UA Family (Front Half Only)
The front half of the Hebie Chainglider on an Urban Arrow Family with a 38T chainring and a Bosch Gen 3 or Gen 4 motor.

Chainring
Connex's hardened front sprocket for a Bosch mid-drive's motor spindle, forged in Germany to outlast a tired original…

Bash Guard Triple 44t Max 104mm Black
A bash guard bolts to the outer position of a triple crankset and takes the hits your big ring would otherwise absorb…

(Full Speed Ahead) CK-220 Bosch Gen 4 eBike Crankarms
FSA's CK-220 is a replacement ISIS-spline crank arm set for Bosch Gen 4 e-bike motors, in four lengths.

Bosch Spider, BCD104, 50mm Chainline

Chainring Alloy Megatooth 48T 4 x 104 BCD 4H N11
A 48-tooth FSA Megatooth alloy chainring with a four-bolt, 104 mm bolt circle, for 11-speed chains.

CK-602 Crank Arm, Bosch Gen 3, Left, 170mm
This is the left, non-drive-side arm from FSA's CK-602 set, 170mm, for Bosch Gen 3 (Active Line, Performance Line)…

Cranks Armset 170MM Isis CK-762
A 170mm crank arm set with an ISIS spline fitting.

DH Pro MTB Chainring
FSA's DH Pro, a bolt-on 42-tooth chainring in a 104 BCD 4-bolt pattern, aluminum in black or silver.

E-Bike Chain Guard
The W1125 is a steel chain guard that sits behind a 15 to 17 tooth Bosch Gen 2 e-bike sprocket.

eBike Lockring for Bosch - Boost148, Anodized Black
FSA's lockring for its Bosch e-bike chainrings and spiders, in the Boost 148 version, anodized black.

Offset Chainring, Bosch Gen 2, 20t Boost
A 20-tooth FSA chainring for Bosch Gen 2 motors, offset for a Boost 148 chainline.

WA322 eBike Chainring, Bosch Gen 2
FSA's WA322 is the drive sprocket that mounts on a Bosch Gen 2 (Active Line, Performance Line) motor, 16 teeth…

WA324 eBike Sprocket for GEN 2 Bosch
The FSA WA324 is the 18-tooth stainless drive sprocket that bolts to a Gen 2 Bosch motor spindle, for Boost 148 mm rear…

Carbon Drive CDX CenterTrack Front Sprocket
The front sprocket (pulley) in a Gates CenterTrack belt system, bolted to the crank in 4-bolt (104 BCD) or 5-bolt (130…

Carbon Drive Chainring Spider, Bosch Gen 4
This is the Gates Carbon Drive spider that adapts a 5-bolt, 130mm BCD front belt sprocket to a Bosch Gen 4 (Performance…

Miranda Chainring, 38t, 104 BCD
A 38-tooth steel replacement chainring for Gazelle bikes that use a 4-bolt, 104mm BCD crankset.

170mm, Impulse OEM
Miranda's 170 mm square-taper crank for the Impulse motor system used on Kalkhoff and other Derby Cycle e-bikes.

Alloy Blade Chainring
A 42-tooth replacement chainring on the 130 mm 5-bolt pattern, CNC-machined from 6061 aluminum.

Origin 8 Alloy Single Speed Chainring Bolts
Alloy chainring bolts in the short single-speed length, for cranks that carry one chainring.

8mm Hex Crank Arm Fixing Bolt/Cap Pair
A pair of 8mm-hex crank arm fixing bolts with dust caps.

Double Chainring Bolts Silver Chromoly
A set of silver chromoly chainring bolts for a double crank.

4-Bolt Chainring - 44t, 104 BCD, Black
A round, 44-tooth Promax BMX chainring machined from 6061-T6 aluminum.

Exi Crank Bolt - M15
The RaceFace EXI crank bolt is the M15 fixing bolt that holds the non-drive arm onto the spindle of RaceFace cranks…

Narrow Wide Chainring. 110mm Bcd, 38t, Black
This RaceFace narrow-wide chainring turns a 110mm BCD, 5-bolt crank into a clean 1x setup.

104 BCD eBike Spider - Bosch Gen 3, 47mm Chainline
A black Samox spider that takes a 104 BCD chainring on a Bosch Gen 3 drive unit, at a 47 mm chainline.

BG13 Chainring Guard, 42-46t
An aluminum guard ring that bolts to a 130 BCD five-arm spider and wraps a 42-46t chainring.

ISIS eBike Crank Bolt, M15
The bolt that clamps an ISIS-splined crank arm onto an e-bike spindle.

Steel Chainring with Chainguide, Bosch Gen 2
A Samox 18-tooth steel chainring with a single chainguide, cut for the Boost chainline on Bosch Gen 2 motors.

STEPS FC-EM600 Crank Arm Set, 160mm
Shimano's FC-EM600 STEPS crank arm set in 160 mm, black, without a chainring or chain guard.

Truvativ GXP Crank Bolt, M15 with M26 Cap
The self-extracting crank bolt kit for SRAM GXP cranks.

X-Sync EX1 Chainring for Bosch Motors

M15 Crank Bolts, Bosch Gen 4, Pair
A pair of TruVativ M15 capless steel crank bolts for Bosch Gen 4 motors.

Trushift 32t 104mm Steel Chainring Black
A 32-tooth steel Truvativ TruShift chainring with a four-bolt, 4.09 in (104 mm) bolt circle.

FSA CK-320 eBike Crank Arms, Bosch Gen 3
chainring wa650 17t
FSA's WA650, a 17-tooth black stainless sprocket that mounts straight onto a Bosch Gen 2 drive unit.
Internally-geared hubs
Hubs with the gears sealed inside, and their service parts. These are specific to the frame and wheel, so check with us before you order.

Automatic CVP Hub Interface
The Automatiq hub interface for enviolo City and Trekking CVP hubs, 44-tooth spline, black.

AUTOMATiQ CVP Hub Interface
This is the electronic shifting interface that turns an enviolo CVP rear hub into an automatic-shifting drivetrain.

AUTOMATiQ Magnet Ring

CVP Internally Geared Hub
The enviolo CVP Extreme is the highest-torque version of enviolo's stepless CVT hub, built for high-power e-cargo bikes…
Talk to usCvp Internally Geared Hub. Trekking, 44T Spline, 36 Hole, 135MM, Disc Brake, Black HU6930 CVP-TR-36-DC-OE
The enviolo Trekking rear hub: stepless shifting across a 380% range, with no fixed gears to click through.

CVP Standard Mounting Hardware Kit. CT, CO, TR
Standard mounting hardware kit for an enviolo CVP rear hub, the dropout/axle hardware that locates and secures the hub…

Dropout Kit
A Tern OEM dropout kit for enviolo internally-geared hubs in the 12 x 142mm thru-axle standard.
Talk to usExtreme Spacer
The axle-side spacer pair that positions the enviolo Extreme CVP hub correctly in a 135mm cargo dropout.

Manual CVP Hub Interface
This is the cable-actuated interface that lives on the right side of an enviolo continuously variable (CVP) rear hub…

Axle Plate PM Set
Axle plate plus PM Bone that anchors a Speedhub's torque to a post mount disc frame, in CC quick-release or A12…

Cable box (incl. Cable pulley 8218 and Cable adjusters 8704)
Replacement cable box for the Speedhub 500/14 shifting system.

PM Bone
PM bone caliper support for mounting a postmount disc brake caliper on a disc-brake Speedhub 500/14.

Speedhub 500/14
The Rohloff Speedhub 500/14 is a sealed 14-speed gearbox built into the rear hub, with one even 526% range and no…

Nexus SG-C6001-8C Internal Gear Hub, 8-Speed, Coaster
Shimano's Nexus INTER-8 coaster-brake hub (SG-C6001-8C): 8 speeds, a 307% range, 36 holes, 132 mm spacing, silver.
Thru Axle A12-Reduction Sleeve
The A12 reduction sleeve that steps a 12 mm thru-axle dropout down to the 7 mm bolt that holds a Rohloff A12 hub.
Derailleurs + shifters
Derailleurs and their shifters go by number of speeds. Shifters for Rohloff, enviolo and Shimano Nexus hubs are here too, and each one fits only its own hub.

Manual Controller Cable End Hardware Kit
The small hardware that finishes the shift cable ends on an enviolo manual controller.

Manual Shifter

4mm Open Nylon End Caps Bottle of 100, Black
A shop bottle of 100 open 4 mm nylon end caps, the black ferrules that finish the ends of 4 mm shift housing so it…

Sport Shift Cable
A 1.1 mm slick stainless derailleur cable that snaps shifting back to crisp when your old cable goes gummy or frayed.

Sport Shift Cable, 1.1 x 3100mm, Tandem
The long one: Jagwire's Sport slick shift cable at 3,100 mm, cut for tandems and any bike with a long run to the rear…

Advent RD-M6195M-B Rear Derailleur - 9 Speed, Medium Cage, Black, With Clutch
A 9-speed rear derailleur with a clutch that keeps the chain quiet and in place on rough roads.

MarvoLT Trigger Shifter, Right, 9-Speed
The microSHIFT MarvoLT is a 9-speed right-hand trigger shifter that runs your rear derailleur, built to Shimano's cable…

Trigger Shifter, Shimano Nexus 8 Compatible
This is microSHIFT's flat-bar trigger shifter for a Shimano Nexus 8-speed internal gear hub, the Inter-8 setup you'll…

XCD Trigger Shifter, Right, 11-Speed
The microSHIFT XCD is an 11-speed right-hand trigger shifter for the rear derailleur, compatible with Shimano DynaSys…

E-14 DC/DC-Can Converter Cable
The lilac 6-pole Higo cable that runs from the Rohloff E-14 DC/DC-CAN converter, mounted mid-frame, to the shifter unit…

E-14 Shifter Unit

E-14 Switch Unit (Shifter)
This is the handlebar switch unit for Rohloff's E-14 electronic shifting system, the control you push to shift…

Shifter Cable Set, 2m
A full re-cable kit for a cable-shifted Speedhub: two 1.1 mm stainless inner cables, two housings and eight ferrules.

Shifter cables 1.1 mm 2.25 m
Rohloff's Speedhub runs two shift cables in a push-pull setup.

Twist shifter "light"
Rohloff's cable twist shifter for a mechanical Speedhub.

Alivio RD-M3100 Rear Derailleur, 9-Speed
A Shimano Alivio RD-M3100 rear derailleur, 9-speed.

Alivio SL-M3100 Shifter, Right, 9-Speed
Shimano's Alivio 9-speed right-hand trigger shifter (RapidFire Plus).

Altus RD-M370-SGS Rear Derailleur, 9-Speed
A Shimano Altus RD-M370-SGS rear derailleur, 9-speed, in the long-cage SGS length.

CJ-7S40/CJ-8S20 Shift Cable Fixing Bolt Unit
The inner cable fixing bolt unit for Shimano's CJ-7S40 and CJ-8S20 cassette joints, part Y74Y98030.

Deore RD-M4120 Rear Derailleur - 10-11 Speed
The Shimano Deore RD-M4120 is a mountain-tier rear derailleur built to run on both 10- and 11-speed Shimano…

Deore RD-M5100 Rear Derailleur, 11-Speed, Long Cage
An 11-speed long-cage rear derailleur from Shimano's Deore M5100 group, with a clutch to keep the chain quiet over…

Deore RD-M5130 Rear Derailleur, 10-Speed
Shimano's 10-speed Deore LINKGLIDE rear derailleur for a single 11-43t cassette, with a SHADOW RD+ stabilizer…

Deore RD-M6000 Rear Derailleur, 10-Speed
A 10-speed rear derailleur from Shimano's Deore mountain group, GS medium cage with the Shadow RD+ clutch to quiet…

Deore SL-M6000 10-Speed Right Shifter
The Shimano Deore SL-M6000 is the right-hand (rear) trigger shifter from Shimano's 10-speed Deore mountain group.

Deore SL-T6000 Shifter - Right, 10-Speed
This is the right-hand Shimano Deore SL-T6000 Rapidfire Plus trigger shifter, built for 10-speed rear drivetrains.

Deore XT RD-M8130 Rear Derailleur, 11-Speed
The Shimano Deore XT RD-M8130-SGS is an 11-speed long-cage rear derailleur built for Shimano's LinkGlide drivetrain…

Deore XT SL-M8130 Shifter, Right, 11-Speed
This is the Shimano Deore XT SL-M8130-R right-hand shift lever, an 11-speed trigger shifter in black.

Derailleur Pulley Set

Nexus SL-C6001 RevoShift Shifter, 8-Speed
Shimano's Nexus SL-C6001-8 REVOSHIFT twist shifter for INTER-8 hubs, with a gear window and the cable, housing…

SL-RV400-8R RevoShift Twist Shifter, Right, 8-Speed
Shimano's REVOSHIFT SL-RV400-8R right-hand twist shifter for 8-speed rear derailleurs, with an optical gear display.

SP41 Shift Housing, 4mm x 50m Box
A 50 m box of Shimano OT-SP41 black shift housing, 4 mm, pre-greased its full length.

XT RD-M786 Rear Derailleur, 10-Speed

XT RD-M8000 Rear Derailleur, 11-Speed
The Shimano Deore XT RD-M8000-GS is an 11-speed mountain rear derailleur with a medium (GS) cage and a Shadow RD+…

Zee SL-M640A Shifter, Right, 10-Speed
A Shimano Zee SL-M640A shifter for the right side, 10-speed.

Stainless Shift Cable, 3100mm (Tandem)
A 3,100 mm (122 in) stainless SRAM shift cable, cut long for tandems, time-trial bikes and long-frame cargo bikes.

Derailleur Hanger - 25
A replacement derailleur hanger, number 25 in the Wheels Manufacturing range.

Shimano Deore RD-M5120 Rear Derailleur, 10/11-Speed
Shimano's Deore RD-M5120 rear derailleur for 10 and 11-speed drivetrains.

Sunlite SIS Stainless Shift Cable, 1.2 x 2000mm, Box of 100
A shop box of 100 Sunlite shift inner wires, 1.2 x 2000 mm, slick stainless steel with a Shimano-style (SIS) head.
Pulleys + tensioners
Idler pulleys and tensioners, the wear parts that keep the chain or belt running straight.
E-drive electronics
The electronic parts of the drive, including the interfaces that run automatic-shifting hubs like enviolo AUTOMATiQ. These are specific to the model, so match your bike's exact system before ordering.



