The manual shifter interface for enviolo's stepless CVP hub, in black/grey with multi-turn actuation and listed as CA/SP compatible. This is the twist-control piece that drives the hub's continuously variable ratio, not the hub itself.
We do not have a live stock feed for this one. Ask us and we check with the brand or our distributor, then confirm the price and the date with you before anything is charged.

This is the cable-actuated interface that sits on the right side of an enviolo CVP rear hub (CVP is the continuously variable hub, stepless ratios with no shift clicks). It takes the cable pull from your twist-shifter and turns it into a smooth gear change at the hub.
This is the grip-shift (manual) interface, the counterpart to an electronic AUTOMATiQ setup. Buy it for a cable-shifted enviolo build or to service one. If your bike auto-shifts based on cadence, that's AUTOMATiQ and a different part.
It comes in two options: Heavy Duty / Extreme for higher-torque mid-drive and cargo hubs, and CA/SP for the Cargo and Sportive line. The catch is the shift spline.
Both options here are the Multi-Turn version, roughly 271° of grip rotation across the full range, with fine ratio control and low shift effort. enviolo no longer makes the older One-Turn (around 112°), so if you're replacing a One-Turn setup you're converting to Multi-Turn.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Pick by the hub on your bike, not by guessing. The Heavy Duty Compatible, Multi-Turn 40t Spline option suits enviolo Heavy Duty / Extreme hubs (the higher-torque hubs found on many cargo and powerful mid-drive e-bikes, including GSD-style cargo bikes). The CA/SP Compatible option matches the enviolo Cargo (CA) and Sportive (SP) hub line. If you're unsure, check your hub markings or send us the bike model and we'll confirm.
No. This is the manual interface for a cable twist-shifter. AUTOMATiQ uses an electronic interface with a motor and controller. They're not interchangeable, though enviolo does sell a separate retrofit kit if you're converting between the two.
Often, yes. A worn or damaged interface is a common cause of an enviolo hub that slips, spins without shifting, or won't hold a gear. The interface is the serviceable assembly on the right side of the hub, so replacing it is a typical repair. If you're not sure the interface is the culprit, it's worth a quick diagnosis first.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.