SRAM PC-1031 is a 10-speed derailleur chain with solid pins that SRAM rates as e-bike approved. It fits industry-standard 10-speed drivetrains, so count your rear cogs first: ten cogs means this chain, and it joins with SRAM's single-use 10-speed PowerLock link.
A 10-speed chain is narrower than a 9-speed and wider than an 11-speed, so the speed count has to match. Count the cogs on your rear cassette; ten means PC-1031.
SRAM joins this chain with a 10-speed PowerLock link that snaps closed by hand. SRAM rates each PowerLock for one use, so fit a fresh one whenever you split the chain.
It comes as a 114-link chain. Most bikes need it shortened to match the old chain, which takes a chain tool.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It fits 10-speed derailleur drivetrains. Count the cogs on your rear cassette: if there are ten, this is the right chain. It isn't for single-speed, internal-hub or belt-drive bikes.
SRAM's retail PC-1031 ships with a PowerLock. The 114-link chain listed here comes from SRAM's bulk pack, so add a card of 10-speed PowerLock links if you need one, or email us to check.
Yes. SRAM lists the PC-1031 as e-bike approved.
No. SRAM says each 10-speed PowerLock is good for one application, so use a new link each time the chain is broken.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.