A 22-tooth Gates Carbon Drive rear sprocket for CenterTrack belt systems, in gray. It uses the 3-Lobe SureFit spline, so it bolts onto a Shimano/SRAM 3-lobe-style rear interface rather than a hub-specific carrier.

This is a Gates Carbon Drive CenterTrack rear sprocket. It pairs with a CenterTrack belt and front sprocket. It is not a chain cog and will not work on a chain drivetrain.
The 3-Lobe SureFit spline mounts to a Shimano/SRAM 3-lobe-style rear interface. Confirm your hub or freehub uses this 3-lobe mount before ordering, since Gates also makes hub-specific rear sprockets.
Tooth count changes your final gear ratio. Going up or down from your stock count makes pedaling easier or harder, so match the count your bike was built with unless you're intentionally re-gearing.
It fits bikes running a Gates Carbon Drive CenterTrack belt with a 3-Lobe SureFit (Shimano/SRAM 3-lobe-style) rear interface. Gates also makes hub-specific rear sprockets, so the 3-lobe mount is the thing to verify. Send us your bike's make, model, and year and we'll confirm fit before you order.
No. This is a belt-drive sprocket for the Gates CenterTrack system. It only works with a matching Gates CenterTrack belt and front sprocket, not with a chain or a standard cassette cog.
For a like-for-like replacement, match the 22-tooth count your bike came with so your gearing stays the same. A different count changes your gear ratio and may require checking belt length and tension. If you're re-gearing, send us your setup and we'll help size it.
Order it, ask us about fit, or book an install at the Brooklyn shop.