A 1.1 mm slick stainless derailleur cable that snaps shifting back to crisp when your old cable goes gummy or frayed. The inner wire is die-extruded so the strands sit smooth instead of rough, which means less drag through the housing and a cleaner return to each gear; stainless steel keeps it from rusting where road grit and rain get in.
Available in-store and by order. Ask us and we’ll have it ready.

Cables stretch and pick up grit over time, which shows up as slow, notchy, or skipping shifts. A fresh slick stainless inner wire is the cheapest fix and usually the first thing to try before touching derailleur limit screws or barrel adjusters.

The wire is die-extruded so the outer strands sit smooth rather than rough, which lowers friction as it slides through the housing. Lower friction means a lighter shift lever feel and a more positive return into each gear.
2300 mm covers a standard rear derailleur on most bikes. Step up to 3100 mm or 4445 mm only for tandems or long cable runs where a standard length will not reach.
Shift cables are a wear item. We replace them on tune-ups and recommend a fresh inner cable any time you are already opening up the drivetrain, especially on commuter and cargo e-bikes that rack up miles in all weather.
It threads with a SRAM/Shimano barrel head on one end and a weld-cut tip on the other, so it feeds through housing without fraying and works with the indexed shifters on nearly every Shimano or SRAM-equipped bike, including the geared e-bikes we service. We reach for these on tune-ups all the time: a fresh cable is the single cheapest fix for sluggish or skipping shifts, and it's worth doing before you start chasing derailleur adjustments.
Pick 2300 mm for a standard rear derailleur on most bikes; 3100 mm and 4445 mm cover tandems and long cable runs where a standard length won't reach. If your shifting feels notchy, slow to drop into a gear, or won't hold an adjustment, the cable is usually the place to start.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
The SRAM/Shimano barrel head fits the indexed shifters on nearly every Shimano- or SRAM-equipped bike, including most geared e-bikes. It does not fit Campagnolo shifters, which use a different cable end. If you are unsure what your bike runs, email us your bike and we will confirm.
Most bikes use the 2300 mm cable for a standard rear derailleur. The 3100 mm and 4445 mm lengths are for tandems or unusually long cable runs. You can always trim a longer cable, but you cannot add length, so when in doubt size up.
This is a shift (derailleur) cable, 1.1 mm. Brake cables are thicker (1.5 mm or 1.6 mm) and use a different head, so they are not interchangeable. If your brakes feel spongy, you want a brake cable instead.
No. This is the inner wire only. If your housing is cracked, kinked, or full of grit, replace it at the same time for the cleanest shifting. We stock housing and full shift kits too.
Often, yes. A stretched or gritty cable is the most common cause of slow or skipping shifts, and a fresh slick stainless wire is the cheapest first step. If shifting is still off after a new cable and a quick adjustment, bring it in and we will sort the derailleur.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.