A Shimano CUES CS-LG400-10 cassette, 10-speed with an 11-43T range, for bikes running the CUES LINKGLIDE drivetrain. LINKGLIDE is Shimano's wear-resistant cog system built for e-bikes and high-torque riding, and it mounts on a standard Shimano HG freehub.

LINKGLIDE is Shimano's tooth profile for the higher chain tension of e-bikes and loaded bikes. Shimano rates it for three times less cassette wear than its HYPERGLIDE design.

Count the clicks on your shifter for the speed count, then the teeth on the biggest cog. A 10-speed 11-43t and 11-48t are not interchangeable without a derailleur that covers the bigger cog.

All versions mount on the Shimano HG freehub body. The 11-speed version is not listed for several older HG hubs, so check your hub before ordering 11-speed.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Only if it's LINKGLIDE (CUES or another LINKGLIDE group) at the same speed count. It won't index with a HYPERGLIDE shifter and derailleur.
Match what's on the bike. Shimano's RD-M5130-GS 10-speed derailleur, for example, is rated for an 11-43t only, so moving to 11-48t needs a derailleur rated for a 48t cog.
A LINKGLIDE or HG 11-speed chain, including on the 10-speed version.
No, it uses the standard Shimano HG body. The one catch is the 11-speed version on some older hubs; send us the hub model and we'll check.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.