The axle-side spacer pair that positions the enviolo Extreme CVP hub correctly in a 135mm cargo dropout. The Extreme is enviolo's high-load stepless hub, rated to 100 Nm of motor torque and a 661 lb (300 kg) gross vehicle weight for heavy e-cargo, and it ships with a dedicated left-hand and right-hand spacer that set hub spacing and keep the wheel centered.
Available in-store and by order. Ask us and we’ll have it ready.

The Extreme hub seats in a 135mm dropout, and these two spacers position the hub shell so the wheel runs centered and the axle clamps square. The flanged left-hand piece and the stepped right-hand piece do different jobs, so they are sold per side rather than as a matched pair.

This is OEM hardware you reach for during a build or repair: a fresh Extreme wheel lacing, moving an Extreme hub to a different frame, or replacing a spacer lost during a dropout adapter swap. It does not change how the hub shifts or rides.
The Extreme is enviolo's heavy-cargo CVP hub, rated to 100 Nm and a 300 kg gross vehicle weight. If your cargo bike uses it, these are the correct spacers. The Heavy Duty, Trekking, and City enviolo hubs use different hardware, so confirm the hub line before ordering.
Cargo-hub spacers are easy to mis-order. We service enviolo hubs on Urban Arrow and Riese & Müller cargo bikes, so we can match the spacer to your exact hub and axle type. Email us the bike and we will pull the right side.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It sets the enviolo Extreme CVP hub's spacing inside a 135mm rear dropout so the wheel runs centered and the axle clamps square. There is a left-hand (flanged) and a right-hand (stepped) spacer, each shaped for its side of the hub.
It depends on which side you are servicing. The left hand is the flanged piece; the right hand is the stepped piece. They are not interchangeable. If you are unsure which you lost, send us a photo or your bike model and we will confirm.
The Extreme is enviolo's heavy-cargo CVP hub (100 Nm, 300 kg gross vehicle weight). On bikes we service it shows up on Urban Arrow cargo bikes and the Riese & Müller Multicharger Vario. It is not the same as the enviolo Heavy Duty, Trekking, or City hubs, which use different spacers.
No. This spacer is specific to the Extreme hub. The Heavy Duty, Trekking, and City CVP hubs use their own hardware kits. Tell us your hub line and we will point you to the correct part.
These are a service part, so they are not on the cart yet. Email us your bike model and which side you need and we will get you the correct left-hand or right-hand spacer.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.