This is the wireless handlebar controller for enviolo's AUTOMATIQ auto-shift CVT hub system, in the Commercial spec. It's the unit that lets you set and adjust your target cadence so the hub trims its ratio automatically as you ride.
We do not have a live stock feed for this one. Ask us and we check with the brand or our distributor, then confirm the price and the date with you before anything is charged.

This is the thumb controller for enviolo's AUTOMATiQ automatic shifting, the version of the enviolo CVP hub that picks your gear ratio for you. Its buttons set your target cadence and switch between automatic mode and a manual mode that emulates nine gears, so you can hand the shifting to the bike or take it back when you want it.
It pairs with the AUTOMATiQ interface over Bluetooth Low Energy, so there's no shift cable to route or replace. A single CR2032 coin cell powers it, and you swap the battery with a coin or a 2.5 mm Allen key. No charging.
Buy it if your original controller is lost or failing, or to add a handlebar control alongside shifting from the motor display. It's the inexpensive part of an AUTOMATiQ setup, and we can pair and dial it in here so it talks to your hub correctly.
This controls AUTOMATiQ (automatic) enviolo systems only. It will not work with manual twist-grip enviolo hubs, which shift mechanically and have no electronics to pair to.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
No. It's the controller for the enviolo AUTOMATiQ automatic shifting system specifically. If your bike has a manual enviolo hub with a twist grip, this controller won't convert it to automatic. Confirm your bike was built as an AUTOMATiQ before ordering.
They belong to different enviolo shifter sets, which are tuned for different bike types and drive systems. The hardware looks similar, but the right choice is whichever set your bike was originally specced with. If you're unsure, check your bike's build sheet or send us the model and we'll confirm.
No cable. It's a wireless Bluetooth controller powered by replaceable coin-cell batteries, mounted at the bar end on a standard 22.2 mm bar.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.