FSA's CK-220 is a replacement ISIS-spline crank arm set for Bosch Gen 4 e-bike motors, in four lengths. If a Bosch Gen 4 bike has a bent, gouged, or seized crank arm, this is the direct fix: a die-cast aluminum pair with the same ISIS-Drive interface the motor's spindle uses, in black with printed FSA graphics.
Available in-store and by order. Ask us and we’ll have it ready.

When a Bosch Gen 4 bike has a bent, scratched, or seized crank arm, you don't need a whole new drive side. The CK-220 swaps onto the existing ISIS spindle so you replace only the part that's worn.
The arms are die-cast aluminum in a black blasted finish with printed FSA graphics, weighing about 1 lb (454 g) for the pair.
Offered in 155, 160, 165, and 170 mm. Crank length sets your pedaling circle, not your gearing, so re-order the length already on the bike unless you have a reason to change it.
Stepping down to 155 or 160 mm gives more pedal-to-ground clearance for cornering and a tighter, higher-cadence spin. It's a fit choice, not a performance upgrade.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It fits the Bosch Gen 4 drive unit's full-size ISIS spline spindle. It does not fit the Bosch Gen 3 mini-ISIS spindle or the smaller Active Line BNI interface. If you're not certain which spindle your bike has, send us the bike model and year and we'll confirm before you order.
Yes. FSA builds the CK-220/IS around the ISIS Drive interface, so it also fits Yamaha PW-X and Brose motor spindles that use full-size ISIS.
Match the length already on your bike unless you have a reason to change it. Crank length changes your pedaling circle, not your gearing. A shorter arm (155 or 160 mm) adds ground clearance and suits a higher-cadence spin; a longer arm (170 mm) gives a slightly larger pedal stroke.
The left and right crank arms only. There's no bottom bracket, pedals, chainring, or crank bolts in the box, so reuse the hardware and chainring from your current cranks.
If you're comfortable with a crank puller and a torque wrench, yes, the arms bolt onto the existing ISIS spindle. We also do this swap in the shop. Email us to order or to book the install.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.