The lilac 6-pole Higo cable that runs from the Rohloff E-14 DC/DC-CAN converter, mounted mid-frame, to the shifter unit at the rear Speedhub, in seven lengths from 15.7 in (400 mm) to 39.4 in (1000 mm) to match your frame’s run. The converter and shifter unit are sealed parts, so after a crash or a chafe-through this cable is the replaceable link, with keyed water-resistant connectors that only seat one way.
Available in-store and by order. Ask us and we’ll have it ready.
The E-14 DC/DC-CAN converter sits mid-frame and the shifter unit sits at the rear Speedhub. This is the lilac Higo cable that carries shift signal and power between them.
Seven lengths run 400 to 1000 mm. The run depends on frame size and converter placement: compact commuter frames take the shorter cables; big cargo and longtail platforms like the GSD R14 take the 800 to 1000 mm runs. Send us your model if you are unsure and we will match it.
Both ends use 6-pole lilac Higo connectors that seat one way only, so there is no wrong orientation. They are water-resistant for normal riding, just keep a pressure washer off them. The connectors match the rest of the E-14 2.0 wiring set.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It depends on your frame and where the DC/DC-CAN converter is mounted. Compact commuter frames usually take 400 to 600 mm; larger cargo and longtail bikes like the Tern GSD R14 take 800 to 1000 mm. If you tell us your bike model we will pull the right length.
It runs from the Rohloff E-14 DC/DC-CAN converter, mounted mid-frame in the downtube or seat tube, to the E-14 shifter unit at the rear Speedhub. The handlebar switch uses a separate cable.
It only fits the Rohloff E-14 electronic shifting system on Bosch-equipped bikes (Smart System and Gen 4 Performance/Cargo Line). It is not a universal cable and does not fit Shimano, Brose, Yamaha, or Panasonic drivetrains.
Just the cable. The DC/DC-CAN converter, shifter unit, and switch unit are sealed and not user-serviceable, but this connection cable between the converter and shifter unit is a selectable spare you can swap on its own.
The 6-pole Higo connectors are sealed for normal riding and rain. Avoid high-pressure washing directly at the connectors, which can force water past the seal.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.