The Shimano Deore RD-M4120 is a mountain-tier rear derailleur built to run on both 10- and 11-speed Shimano drivetrains, so it's a clean replacement for a worn or damaged Deore-level rear mech. Because it spans two speed counts, the part that has to match is your shifter: a 10-speed shifter pairs it as a 10-speed system, an 11-speed shifter as an 11-speed system.

One derailleur covers both counts. It takes its speed from the matching Shimano shifter, so confirm whether your bike runs a 10- or 11-speed shifter and the system follows.
Deore is Shimano's workhorse mountain group. The RD-M4120 is the same-or-better swap for a tired Deore rear derailleur and keeps your existing shifter, chain, and cassette working as a set.
Rear derailleurs are sensitive to speed count, cable pull, and total gear range. If you are not sure of your exact fit, tell us your bike and year and we'll check it.
It fits Shimano 10- and 11-speed mountain drivetrains and pairs with a matching Shimano shifter. Fit also depends on your cassette's largest cog and your total gear range, so if you're unsure, send us your bike and model year and we'll confirm before you order.
Both. The RD-M4120 works as either, and the system speed is set by the shifter you pair it with. Run it with a 10-speed shifter for a 10-speed setup, an 11-speed shifter for 11-speed.
In most cases yes, as long as they're Shimano 10- or 11-speed and in good shape. A worn chain or cassette can keep a new derailleur from shifting cleanly, so it's worth checking those at the same time. Not sure? Send us your setup.
Order it, ask us about fit, or book an install at the Brooklyn shop.