Gates Carbon Drive is the belt-drive system on our internal-gear-hub bikes, carbon-cord belts, sprockets, and cogs that replace the chain. A belt runs clean and silent with nothing to oil or degrease, and it typically outlasts several chains, which is why it's standard on bikes like the Gazelle Ultimate, R&M Multicharger, and Tern GSD R14.

A belt drive has nothing to oil and nothing to degrease. No black marks on your pant leg, no chain-cleaning ritual, and it runs silent.

Carbon-fiber tensile cords run the length of the belt, so it holds length over time. Chains elongate and need replacing; a belt doesn't stretch, and on an e-bike (where chains wear roughly twice as fast) it typically outlasts several of them.

A belt drive is three matched parts: the belt, a front sprocket, and a rear cog. They have to be a Gates CenterTrack set; you can't bolt a belt onto an existing chainring and cassette cog. We stock front pulleys and rear cogs for enviolo, Rohloff, and SureFit interfaces.
Every belt and cog is matched to your frame and sprocket combo, not universal. The tooth count is printed on the part; send us the number and we'll confirm the right one before you order.
Don’t see yours? Ask the team directly.
That depends on your hub and motor. The belt is sized by the tooth count stamped on it, the front sprocket is set by your crank or spider, and the rear cog is matched to your hub interface (enviolo, Rohloff splined, SureFit, or Shimano/SRAM spline). Send us your bike model or the numbers on the old parts and we'll confirm the exact belt, sprocket, and cog.
No. Belt drive requires an internal gear hub or single-speed (no derailleur), a frame with a belt split in the rear triangle, and a matched Gates CenterTrack front and rear sprocket. It will not bolt onto a derailleur/cassette bike, and you can't break and re-join a belt like a chain.
CDX is the flagship for e-bikes, cargo, and high-torque mid-drives. CDX:EXP adds 7075 aluminum front sprockets and coated-steel rear cogs for heavy e-cargo and Rohloff endurance use. CDC is rated only for analog bikes and motors up to 50 Nm, so don't run it behind a high-torque or Cargo Line motor.
Typically 10,000–30,000 mi (16,000–48,000 km), depending on motor torque and alignment; there's no wear gauge, so it's a visual inspection. There's no lube and no degrease; tension is set with the Gates Carbon Drive app or a Krikit gauge. Every belt bike we sell or service gets its tension and alignment set on the stand.
Yes; pick the belt, sprocket, or cog you need and add it to the cart. Not sure which size or interface? Email us with your bike or the numbers on the old parts and we'll sort it before you order.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.