This is the SRAM EX1 chain, the 10-speed-width replacement chain for SRAM's 8-speed EX1 e-bike drivetrain. EX1 is built specifically for the torque of a mid-drive motor, so it pairs an 8-sprocket cassette with a 10-speed chain for strength under load.

EX1 is an 8-speed e-bike drivetrain that uses a 10-speed-width chain for extra strength under motor torque. Use this chain with EX1 shifters, derailleur, cassette, and chainring.
Ships at 144 links, long enough for the full EX1 gear range. You size it to your bike during install, so trim links to match your chainstay and cassette.
Check it with a chain wear tool and replace before it passes 0.75%. A fresh chain measured on time protects the more expensive EX1 cassette and chainring from premature wear.
It fits bikes running a complete SRAM EX1 drivetrain (EX1 shifter, derailleur, 8-speed cassette, and EX1 chainring). It is not a general 8-speed or 10-speed replacement for other systems. If you're not sure your bike runs EX1, send us your bike's make, model, and year and we'll confirm.
SRAM designed EX1 around the higher torque of e-bike mid-drive motors. It uses 8 widely spaced sprockets for clean shifts under power, paired with a stronger 10-speed-width chain. The chain width matches the EX1 cassette spacing, so this is the correct chain even though there are only 8 gears.
One EX1 chain at 144 links. That's a full-length chain you'll size to your frame during installation. Confirm the connecting/power link your build needs, since fitment can vary by setup.
Order it, ask us about fit, or book an install at the Brooklyn shop.