Axle plate and PM bone set (Rohloff art. 8558 + 8555) for mounting a Speedhub 500/14 A12, the 12 mm thru-axle version, in a frame with postmount disc tabs.
We do not have a live stock feed for this one. Ask us and we check with the brand or our distributor, then confirm the price and the date with you before anything is charged.

A Speedhub axle tries to twist under load. On a post mount frame, the PM Bone and PM axle plate pass that torque into the caliper mount, with no torque arm along the stay.

The PM Bone moves the caliper out by one rotor size, so a frame built for 160 mm runs a 180 mm rotor and a 180 mm frame runs 203 mm. Order the matching Rohloff 4-bolt rotor with it.

Choose the CC set for a quick-release Speedhub and the A12 set for a hub that bolts into a 12 mm thru-axle frame. There isn't a PM set for TS threaded-axle hubs.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
CC if your Speedhub uses a quick-release skewer, A12 if it bolts into a 12 mm thru-axle frame. Both sets share the same PM Bone.
The PM Bone sits between frame and caliper and works as a 160-to-180 or 180-to-203 mm adapter, so the caliper needs the next rotor size up.
Yes, with an IS-to-PM adapter: IS 160 + adapter 160 + PM Bone needs a 180 mm rotor, and IS 180 + adapter 180 + PM Bone needs 203 mm. Rohloff's Speedbone or Monkey Bone are the other options for IS frames.
6–8 Nm (53–71 in-lb) for the M6 bolts.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.