A reusable master link that lets you split and rejoin a 6, 7, or 8-speed chain by hand, no chain tool required. The SRAM PowerLink is a two-piece connector: the outer plates slot together over a keyhole, and a slight tug under chain tension locks them.
Available in-store and by order. Ask us and we’ll have it ready.

The PowerLink turns chain removal into a tool-free job. Push the two plates together to unseat the pins, slide them apart, and the chain is open, no chain-breaker needed. That is what makes a real degrease in a parts washer or an ultrasonic bath practical instead of a hassle.
This is the 8-speed PowerLink, the reusable generation. Open and close it as many times as you need. SRAM rates the 10 and 11-speed PowerLock for a single install, so match the link to your chain: PowerLink for 6/7/8-speed, PowerLock for 10/11-speed.
A spare link weighs nothing in a saddle bag and turns a broken chain on the road into a quick fix. Pair it with a couple of spare chain pins and you can get home without walking.
It works with any standard 7.1 mm derailleur chain, SRAM or Shimano, across 6, 7, and 8-speed setups. That covers most of the 8-speed city and trekking e-bikes we keep running. For 9-speed use the 9-speed PowerLink; for 10 or 11-speed use the PowerLock.
Reach for it when you want to pull the chain for a proper degrease in a parts washer, swap a chain you check with a wear gauge, or carry a spare link in your saddle bag for a roadside repair. SRAM's 8-speed PowerLink is the reusable generation, so you can open and close it as many times as you need, unlike the 10 and 11-speed PowerLock, which SRAM rates for a single install.
It fits any 6, 7, or 8-speed derailleur chain running the standard 7.1 mm width, SRAM or Shimano, which covers most of the city and trekking e-bikes we service that still run an 8-speed cassette. We keep these on the bench because a clean, properly lubed chain is the cheapest way to make a drivetrain last, and a master link is what makes that a five-minute job instead of a chore.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Yes. The 8-speed PowerLink is the reusable design, so you can open and close it by hand as many times as you need. SRAM only rates the 10 and 11-speed PowerLock as single-use, because the locking ridge can deform on removal.
Yes, as long as the chain is a standard 6, 7, or 8-speed derailleur chain at 7.1 mm width. The PowerLink works across SRAM and Shimano 6/7/8-speed chains.
No. Chains get narrower as speeds go up, so the link has to match. Use the 9-speed PowerLink for 9-speed, and the SRAM PowerLock for 10 or 11-speed chains.
No tool to open or close the link itself. To install it the first time you do need the chain already cut to the right length, then you seat the link and pull it tight under chain tension. We can size and fit a chain for you if you would rather not.
This is sold individually as one link (the two plates that join your chain). If you want spares to keep on hand, order more than one or ask us about a card pack.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.