The Shimano Altus CS-HG31 is an 8-speed HG cassette with an 11-32 tooth range. Confirm that the rear wheel uses a compatible HG cassette freehub, not a threaded freewheel, and pair it with the chain and shifter specification recommended for the drivetrain.

Eight cogs spanning 11 to 32 teeth - a wide everyday range that covers flats and moderate climbs. It only works on an 8-speed drivetrain; pair it with an 8-speed chain and matching shifter for clean shifts.
Mounts on a standard Shimano HG (Hyperglide) freehub body, the most common type on hub-geared and derailleur city bikes. SRAM 8-speed cassettes use the same body, so it drops onto most rear wheels without a swap.
Cassettes and chains wear together. Fitting a fresh chain to worn cogs (or vice versa) often causes skipping under load, so we recommend renewing both at the same time for the cleanest shifting.
The bike needs an 8-speed drivetrain and a compatible Shimano HG cassette freehub. A threaded freewheel, a different speed count, or a different freehub standard needs another part. Send us a photo of the cassette and wheel if you are unsure.
Skipping under load, hooked teeth, and poor shifting after adjustment can indicate wear. Check chain wear too; installing a new cassette with a worn chain can leave shifting problems and accelerate wear.
Cassette removal requires the correct lockring tool, a chain whip, and a wrench. Our service team can replace it and check the rest of the drivetrain.
Order it, ask us about fit, or book an install at the Brooklyn shop.