The FSA WA324 is the 18-tooth stainless drive sprocket that bolts to a Gen 2 Bosch motor spindle, for Boost 148 mm rear ends. On these mid-drive Bosch systems the front sprocket bolts to the motor's splined output, so when it wears, gets damaged, or you want to retune your gearing, this is the part you swap.

On a Gen 2 Bosch mid-drive the front sprocket bolts straight to the motor spindle. The WA324 is that part: an 18-tooth stainless sprocket plus lockring that replaces a worn or damaged Bosch drive sprocket and restores clean chain engagement.
A rounded-off drive sprocket causes skip under power and rough delivery long before the chain or rear cog look worn. Replacing it is a quick, inexpensive way to bring an aging Bosch drivetrain back to smooth.
This is the polished-silver 18t, 2.5 mm-offset version stamped "148 Only"; it sets the chainline for Boost 148 mm rear ends. FSA makes other tooth counts and offsets in this family, so match the numbers on your existing sprocket before ordering.
Heat-treated stainless steel stands up to the sustained torque a Bosch motor puts through a single front sprocket, and resists the corrosion that comes with year-round riding.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It mounts to the splined spindle of a Gen 2 Bosch mid-drive motor and is sized for Boost 148 mm rear spacing (the part is stamped "148 Only"). It is the front drive sprocket on the motor, not a rear cassette cog.
FSA makes this family in several tooth counts (15t, 16t, 18t, 20t) and offsets. The WA324 is the 18-tooth, 2.5 mm-offset, polished-silver version for Boost 148. Choosing a different tooth count changes your effective gearing; choosing the wrong offset throws off your chainline. Match the new sprocket to the one already on your motor.
Yes. The lockring that secures the sprocket to the motor spindle is included, so you have what you need to torque it back down.
Check the offset and tooth count stamped on your current sprocket, or measure your rear hub spacing. If you are unsure, send us a photo of the existing sprocket and your motor and we will confirm before you order.
Yes, with a lockring tool and a torque wrench it is a straightforward swap. If you would rather not, we do Bosch drivetrain service at the Brooklyn shop; email us to order or to book the work.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.