Hexlox HEXNUT

The Hexlox Hexnut is a high-security nut! Replace your current wheel nuts with this highly secured and safe from theft nuts, it is designed to work with Hexlox security bolt to provide a safe alternative to a standard solution.

Key Features of Hexlox Hexnut

• High-quality security solution to protect your wheels where you currently have Wheel Nuts
• Equipped with a spinning Stainless Steel Security Ring Secure against pliers, vise grips, hammer, etc.
• No more carrying around a Spanner / Wrench in your tool kit!
• High torque MAX 45Nm.
• Silver HexNut comes with silver cap
• Black HexNut comes with black cap
  

How it works.
The Hexlox Hexnut is threaded exactly the same as your existing wheel nut. It tightens with a 6mm Allen Key / Hex Wrench. Once the HexNut is installed, secure against theft with a 6mm Hexlox. Only 1 Hexnut per wheel is required for full security.

For front wheel,
most Front Wheels use M9 [9mm axle diameter] If your Front Wheel Nut fits your rear wheel or its for VanMoof, Miche, and DuraAce, use M10 [10mm axle diameter] For vintage bikes please double-check. 3/8 [9.52mm axle diameter] is rarely used. Best to check your axle diameter.

For rear wheel,
most Rear Wheels use M10x1mm [10mm axle diameter] Fits all Single Speed and Fixed rear wheels. Also suitable for Rohloff, Bion-X, NuVinci, VanMoof Front and Rear, Miche Front and Rear, DuraAce Front and Rear.(not compatible with Sturmey-Archer rear hubs, as these are non-metric).

FOR SHIMANO ALFINE/NEXUS,
3/8 – Alfine/Nexus [9.52mm axle diameter, 3/8′ x 26tpi]

NOTE – Hexlox is NOT included – buy a #6mm Hexlox separately.