Skip to content
Fort Greene showroom · Mon–Sat 9–5 · Sun 10–3Mon–Sat 9–5Call or text 646-736-7716Free test rides

Bosch batteries: the complete reference

Bosch PowerPack vs PowerTube, correct capacities, charging temperatures, dual-battery configs, and the documented Bosch warranty. The reference Propel uses.

Bosch makes the battery system on most of the bikes that come through our shop, so this page covers what type your bike has, how to charge it, how to think about range and what the warranty covers.

Safety certifications: Every Bosch battery in our lineup is UL 2271 certified. The full bike, battery, and charger combination carries UL 2849 certification. For charging habits and NYC apartment-storage guidance, see fire safety + charging.

The quick version

  • Charge with the Bosch charger that came with the bike. Let a cold pack warm up to room temperature before it goes on the charger.
  • Think in a range band, not a single number. Real range depends on assist mode, load, terrain, and temperature. Manufacturer figures are best-case ceilings.
  • Store around half charge for winter. Not full, not empty. Indoors, above freezing.
  • Skip third-party chargers and used batteries. UL 2849 certification covers the specific bike, battery, and charger combination.

What you have

Bosch ships two physical battery formats.

PowerPack is the external battery. It mounts on the frame (top tube, rear rack, or a downtube bracket) and is easy to remove and charge off the bike. Common on older bikes and still on some current models (most Benno, some Gazelle). On the current Smart System, the rack-mounted PowerPack comes in 400 Wh and 500 Wh, and the frame-mounted PowerPack Frame comes in 400 Wh, 545 Wh, 725 Wh, and 800 Wh. Earlier eBike System 2 PowerPacks were 300 Wh, 400 Wh, and 500 Wh. There is no PowerPack 625; 625 is a PowerTube capacity.

PowerTube is the integrated battery, hidden inside the downtube. Standard on current Riese & Müller, Tern, Urban Arrow, and most Gazelle builds. On the Smart System it comes in 500 Wh, 540 Wh, 600 Wh, 625 Wh, 750 Wh, and 800 Wh. Earlier eBike System 2 PowerTubes were 400 Wh, 500 Wh, and 625 Wh, so the 625 exists in both generations. The 625 packs are physically interchangeable on the frame, but the rest of the system (motor, display, charger) is not cross-compatible, so confirm the bike's generation, not just the watt-hour number. The CompactTube 400 covers compact frames.

DualBattery is not a third battery type. It's a factory configuration on select bikes that adds a second pack for range, not standard across a whole model line, and not always two PowerTubes. The R&M Superdelite and some other touring R&Ms run two PowerTubes for 1,250 Wh combined. A Tern GSD's second bay takes a second PowerPack. Whatever the pair, the system manages both packs together and the display shows one combined charge level, not a separate percentage per battery. Dual bikes ship configured for a single pack and the dealer enables the second at delivery. A single-battery bike can't be retrofitted to dual after the fact; that's a factory build only.

All of these use the same Bosch Battery Management System (BMS), the chip that keeps cells balanced and protects against overheating and over-discharge. It's what separates a genuine Bosch pack from a knockoff.

Charging, done right

Use the Bosch charger that came with the bike. The standard charger is a 4A unit and the only Bosch charger sold in the US, so the one in the box is the fastest charge available here. Bosch chargers aren't cross-compatible across motor generations, so don't mix a Classic Line charger with a Smart System bike or the reverse. The BMS stops charging on its own when the pack is full, so you don't have to time the unplug. Partial charges are fine, and there's no need to run the pack down before topping it up.

Charge temperature matters. Bosch specs charging between 32°F and 104°F (0 to 40°C). If the bike just came in from the cold, let the battery reach room temperature before plugging in. Never charge a frozen pack.

On R&M dual builds, keep both packs installed while charging. Those bikes need both packs in the frame to charge at all. You can pull one to lighten the bike for a ride, but don't charge with a bay empty. Other dual setups (like a Tern GSD's two PowerPacks) behave differently, so follow your bike's manual. Whatever you ride, power the system off before removing or installing a pack.

How long a charge takes

On the 4A charger, a 625 Wh PowerTube takes about 4.5 hours from empty to full. Smaller packs finish sooner and larger or dual setups take longer, so plan on an overnight charge or a daytime top-up rather than a fixed number. Bosch's 6A fast charger was never sold in the US, so any copy quoting a roughly three-hour fast charge is wrong for bikes bought here.

Range, realistically

Bosch's own range estimates use fixed test conditions, so the marketing number is a best case. Think in a band. A typical mid-size battery in mixed city riding commonly lands in a 45 to 80 mile range depending on assist mode and load. For a number tied to your exact motor, battery, terrain, and load, run it through the Bosch range calculator.

Variables that cut range, roughly in order of impact:

  • Assist mode. Eco stretches range about two to three times further than Turbo. Most riders don't need Turbo most of the time.
  • Weight. More total weight, rider plus cargo, means less range.
  • Temperature. Cold weather temporarily cuts the range you get on a given day. The capacity comes back when the pack warms up; it is not permanent damage.
  • Hills. Climbing uses more energy than flat routes.
  • Tire pressure. Low tires waste energy. Check pressure about once a month.

If range drops noticeably and none of these explain it, bring the bike in. We'll diagnose the battery system and price any recommended work before proceeding.

Long-term care

Bosch's US battery warranty covers 500 charge cycles or 2 years, whichever comes first, to at least 60% of original capacity. Terms change, so confirm the current warranty on bosch-ebike.com before you rely on it. A full cycle is one complete discharge and recharge, not one plug-in, so two half-charges count as one cycle. Capacity tapers gradually with use.

Signs a battery is aging:

  • Range noticeably down with no change in ride conditions
  • The pack no longer takes a full charge (gauge reads 100% but runs down fast)
  • The Bosch app or display reports reduced capacity
  • The pack runs hot during charging (new cells warm slightly; a failing pack can get genuinely hot)

Some capacity loss over time is normal. A large, sudden drop is not, so bring it in and we'll test it.

Winter storage

If you're not riding for two or more months:

  • Charge to around half, not full and not empty
  • Store indoors at room temperature, above freezing
  • Take it off the bike (Bosch doesn't recommend storing it on the bike)
  • Check every couple of months and top back up to about half charge

There's more detail on longer storage in our proper winter storage article.

Third-party batteries and chargers

We don't recommend used Bosch batteries. A used pack with unknown charging history may have cells that are already failing, and the BMS reports abuse rather than undoing it, sometimes too late. We've seen packs overheat and vent, including one inside a customer's apartment.

Non-Bosch chargers physically plug in, but they lack the handshake the BMS expects and can push more current than the cells want. Use the Bosch charger that came with the bike, or a factory replacement.

A battery from an unknown seller also voids your warranty the moment you use it, and our service team can't certify a bike that's running a non-authentic battery.

Questions we answer weekly

"Can I open my battery and replace bad cells?" No. A Bosch pack is sealed, and its BMS is factory-calibrated to the exact cells inside. Opening it to swap cells is a real fire risk, ends the pack's UL listing, and voids the warranty. A genuinely failing pack gets replaced, not opened.

"Can Bosch batteries be reconditioned?" Bosch has no reconditioning program. A few third-party services exist; we do not recommend them, for the same UL-listing reasons.

"What do I do with an old battery?" Do not trash it. Propel takes Bosch batteries for recycling and ships them back through Bosch's program. See how to recycle a Bosch battery.

"Water got inside the battery mount. Now what?" Dry everything, do not plug in until it is fully dry, and bring it in if the bike will not turn on. Details: what to do if water gets into the battery mount.

"Bad battery, bad charger, or bad outlet?" Start with the easy check: confirm the wall outlet works with another device. Beyond that, don't plug a good pack into a questionable charger, or a questionable pack into a good charger, since a bad part can damage a good one. Bring the bike in and we'll test the pack and charger on OEM-compatible equipment. Walkthrough.


If you're unsure, send the bike model and symptoms through the service form. Do not charge or ride with a battery that is damaged, unusually hot, swollen, leaking, or smoking.

More in Motors & batteries

Still stuck, or is this about your own bike? The service team answers these all day.