Bosch Error Codes
What the common Bosch display error codes mean, from blocked buttons to connection faults, and which ones you can clear yourself before calling the shop.
If an error code shows up on your Bosch display, you can clear a lot of them yourself before you call us or bring the bike in. Here's what each one means and what to do about it.
| Code | Cause | What to do |
|---|---|---|
| 410 | One or more buttons of the onboard computer are blocked | Check for blocked buttons (dirt or debris) and clean them. |
| 414 | Operating unit connection problem | Have connections and contacts checked. |
| 418 | One or more buttons of the operating unit are blocked | Check for blocked buttons (dirt or debris) and clean them. |
| 422 | Drive unit connection problem | Have connections and contacts checked. |
| 423 | eBike battery pack connection problem | Have connections and contacts checked. |
| 424 | Communications error among the components | Have connections and contacts checked. |
| 426 | Internal time-out error | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 430 | Internal battery pack of on-board computer empty | Charge the on-board computer (in the holder or via USB port). |
| 440 | Internal error in the drive unit | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 450 | Internal software error | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 490 | Internal error in the on-board computer | Have the on-board computer checked. |
| 500 | Internal error in the drive unit | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 502 | Bike lighting error | Check the light and its wiring. Restart the system. If it persists, contact your Bosch e-bike dealer. Do not ride in the dark without lights. |
| 503 | Speed sensor error | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 510 | Internal sensor error | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 511 | Internal error in the drive unit | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 530 | Battery pack error | Switch off the eBike, remove the battery pack, and reinsert it. Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 531 | Configuration error | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 540 | Temperature error | The eBike is outside the permissible temperature range. Switch it off and let the drive unit cool down or warm up to range. Restart. If it persists, contact your Bosch e-bike dealer. |
| 550 | An improper load was detected | Remove the load. Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 602 | Internal battery pack error while charging | Unplug the charger from the battery pack. Restart the eBike system. Plug the charger back in. If it persists, contact your Bosch e-bike dealer. |
| 602 | Internal battery pack error | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 603 | Internal battery pack error | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 605 | Battery pack temperature error | The eBike is outside the permissible temperature range. Switch it off and let the drive unit cool down or warm up to range. Restart. If it persists, contact your Bosch e-bike dealer. |
| 605 | Battery pack temperature error while charging | Unplug the charger from the battery pack and let it cool. If it persists, contact your Bosch e-bike dealer. |
| 606 | Battery pack temperature error | Check the wiring. Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 610 | Battery pack temperature error while charging | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 620 | Battery pack voltage error | Replace the charger. Contact your Bosch e-bike dealer. |
| 640 | Charging error | Restart the system. If it persists, contact your Bosch e-bike dealer. |
| 655 | Internal battery pack error | Switch off the eBike system, remove the battery pack, and reinsert it. Restart. If it persists, contact your Bosch e-bike dealer. |
| 656 | Software version error | Contact your Bosch e-bike dealer for a software update. |
| No display | Internal error in the onboard computer | Restart your eBike system by switching it off and back on. |
PowerPack flashes
| Flash code | Cause | What to do |
|---|---|---|
| Two LEDs flashing | The battery pack is defective | Contact your Bosch e-bike dealer. |
| Three LEDs flashing | The battery pack is too warm or cold | Disconnect the battery from the charger until it reaches the charging temperature range, then reconnect. |
| No lights (no charging) | Plug not inserted correctly | Check all plug connections. |
| No lights (no charging) | Battery pack contacts dirty | Carefully clean the contacts with a damp cloth. |
| No lights (no charging) | Socket, cable, or charger defective | Check household voltage; have the charger checked by your bicycle dealer. |
| No lights (no charging) | Battery pack defective | Contact your Bosch e-bike dealer. |
More in Motors & batteries
Still stuck, or is this about your own bike? The service team answers these all day.