Jump to
This is the reference our mechanics use, and the values and tools come straight from the current Bosch service manual. If a value isn't listed, use the manufacturer spec printed on the part or bolt.
If you'd rather we do it, our standard labor rate for anything on this page is $135/hr. Most of these take 5–15 minutes, so a quick re-tighten is usually something you can walk in for.
Twelve tables follow, and each one has its own link, so you can jump straight to the one you need:
Purion display
Intuvia display
Kiox display
Nyon display
SmartphoneHub
PowerTube battery
Rack battery
Frame battery
Drive unit BDU330 / 380 / 385 / 386
Drive unit BDU480 CX / 490P
Speed sensor, standard
Speed sensor, slim
Displays
Purion
Component Tool Torque Clamp mount to handlebar 3 mm Allen key 1 Nm
Intuvia
Component Tool Torque Clamp mount to handlebar 3 mm Allen key 1 Nm Intuvia on mount Phillips PH02 1 Nm Control unit clamp on handlebar Allen key socket 1 Nm Control unit cable on Purion mount Phillips PH00 Finger-tight
Kiox
Component Tool Torque Mount on stem (Ahead mount) Per Ahead mount manufacturer Max 15 Nm Kiox on mount Phillips PH02 0.5 Nm Mounting plate on mount 2.5 mm Allen key 1 Nm Cable box on mounting plate 2.5 mm Allen key Finger-tight Control unit clamp on handlebar 2.5 mm Allen key 1 Nm Control unit cable on Kiox mount Phillips PH00 Finger-tight
Nyon
Component Tool Torque Base plate on mount Torx T10 1 Nm Nyon on mount Torx T10 0.5 Nm Mount clamp on handlebar 2.5 mm Allen key 1 Nm Control unit on handlebar 2.5 mm Allen key 1 Nm Control unit cable on Nyon mount 2.5 mm Allen key Finger-tight
SmartphoneHub
Component Tool Torque Clamps on mount / clamps on handlebar 2.5 mm Allen key 1 Nm Central strut on stem; SmartphoneHub on strut 2.5 mm Allen key 1 Nm Universal mount on SmartphoneHub Phillips PH0 0.5 Nm Control unit clamp on handlebar 2.5 mm Allen key 1 Nm Control unit cable on SmartphoneHub mount Phillips PH00 Finger-tight
Batteries
PowerTube
Component Tool Torque Aluminum plate on L-shape mount Torx T25 5 Nm Mount system on L-shape / U-shape mount Torx T25 5 Nm Lock on threaded flange Torx T20 4 Nm
Rack Battery
Component Tool Torque Lock cover on key cylinder Torx T15 2 Nm
Frame Battery
Component Tool Torque Mount adapter on frame Torx T25 4 Nm Mount casing Torx T15 2 Nm Lock on frame 4 mm Allen key 4-5 Nm Lock cover on lock Torx T15 2 Nm
Drive units
BDU330 / 380 / 385 / 386
Component Tool Torque Drive unit on frame interface 13 mm hex socket 28-30 Nm Mounting plate on drive unit (initial, self-tapping) Torx T30 13-15 Nm Mounting plate on drive unit (subsequent, existing thread) Torx T30 9-11 Nm Chain guard adapter on drive unit Torx T20 Per manufacturer, max 5 Nm Design cover Torx T20 2 Nm Front section of design cover (initial) Torx T20 2 Nm Front section of design cover (subsequent) Torx T20 1.5 Nm Lock ring on drive unit Spider tool 30 Nm Crank arms on BB shaft 8 mm Allen key Per manufacturer
BDU480 CX / 490P
Component Tool Torque Drive unit on frame interface Torx Plus 40 20 Nm ± 2 Nm Chain guard adapter on drive unit 5 mm Allen key Per manufacturer, max 5 Nm Design cover (initial, self-tapping) Torx T20 3 Nm Design cover (subsequent) Torx T20 2 Nm Design cover on chainring side (initial) Torx T20 3 Nm Design cover on chainring side (subsequent) Torx T20 2 Nm Lock ring on drive unit Spider tool 30 Nm Crank arms on BB shaft 6 mm Allen key Per manufacturer Mounting plates (CCP) on drive unit Torx Plus 25 IPR 8 Nm
Speed sensors
Standard
Component Tool Torque Sensor on frame Torx T20 3 Nm Spoke magnet Phillips PH02 1 Nm
Slim
Component Tool Torque Sensor clip on open end of frame Torx T20 0.8 Nm
Working on a bike not covered here? Email service@propelbikes.com with the model and year. We can check the service reference for your exact system.