How to remove and install the Bosch PowerTube
How to release and reinstall the Bosch PowerTube for transport or indoor charging, and why the battery orientation has to match your frame to seat right.
The PowerTube is the Bosch battery built into the downtube. You'll want to pull it out when you carry the bike on a car rack, charge the battery indoors or store it over the winter. Most PowerTube frames use a lockable cover or hatch that releases the pack.
Removing the PowerTube
- Turn the bike off and rest it against something stable, or lay it on its side on a soft surface.
- Insert the key and turn to unlock the battery. On many frames this also releases the cover latch.
- Open the downtube cover or hatch if your frame has one.
- Ease the battery out of the bay. Depending on the frame it releases along the downtube (horizontal mount) or in line with the seat tube (vertical mount). Support its full weight as it comes free.
Installing it again
- Line the pack up with its bay in the correct orientation and slide it in until it seats.
- Press it home until it clicks, close the cover, and turn the key to lock it.
- Remove the key and give the pack a light tug to make sure it's secure.
Why orientation matters
Bosch ships the same PowerTube capacity in two mounting orientations, horizontal and vertical, so it can fit different frame shapes. It's the same battery inside with a different release and hinge, but a horizontal pack won't seat in a frame cut for a vertical one. If you're buying a spare or a replacement and you're not sure which one your frame takes, send us the bike model and year, or a photo of the open bay, and we'll confirm it for you.
Still stuck, or is this about your own bike? The service team answers these all day.