The handlebar clamp kit that mounts a Bosch SmartphoneHub to your bar; pick the size that matches your handlebar. The SmartphoneHub holder doesn't ship with a universal bracket; it bolts to a clamp sized to your specific handlebar diameter, and this is that clamp.
Available in-store and by order. Ask us and we’ll have it ready.

The SmartphoneHub holder mounts to a handlebar clamp, not directly to the bar. This kit is that clamp, for replacing a cracked or lost one, moving the hub to another bike, or fitting a hub that arrived without a bracket.
Three diameters cover the common standards: 25.4 mm, 31.8 mm, and 35.0 mm. Measure your bar where the clamp will sit before ordering; most current e-bike bars are 31.8 mm at the center clamp area.
Both clamp halves plus the bolts, nuts, and threaded knob to torque it down, no extra hardware run to the shop. You supply the Allen key.
The SmartphoneHub is Bosch’s COBI.Bike-app display from the generation before the Smart System. This clamp is for SmartphoneHub setups; a Kiox 300 or System Controller cockpit uses different mounts. Unsure? Send us a photo and we’ll confirm.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Authentic Bosch eBike replacement clamp kit
We service Bosch eBike systems in-house and can confirm the right part from a photo
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
Don’t see yours? Ask the team directly.
Measure the diameter of your handlebar at the spot where the clamp will sit (a caliper is ideal). Most modern e-bike bars are 31.8 mm at the center clamp area; some older or oversized bars are 25.4 mm or 35.0 mm. Match the clamp to that measurement. If you’re not sure, send us a photo of your cockpit and we’ll confirm.
Both halves of the handlebar clamp plus the mounting hardware, bolts, nuts, and the threaded knob, needed to install it. You provide an Allen/hex key.
No. This clamp is for the Bosch SmartphoneHub display (the COBI.Bike-app generation before the Smart System). A Kiox 300, Purion 200, or System Controller cockpit uses different mounts. We can confirm what your bike has from a photo.
No; this is the handlebar clamp/mount kit only. It’s the bracket the SmartphoneHub holder bolts to, sold for replacement or to fit a hub that came without one.
Yes. We’re an authorized Bosch dealer and service Bosch systems in-house. Email us a photo of your cockpit and handlebar and we’ll confirm the display generation and clamp size before you order.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.