Bosch eBike System 2 cable that links the drive unit to a Kiox, Nyon, or SmartphoneHub display, in the 1500 mm short-routing length (Bosch part 1270.016.825). This is the OEM harness that carries data and power between a BES2 motor and the cockpit.

Restores the link between your Bosch System 2 motor and the Kiox, Nyon, or SmartphoneHub when the display loses signal, throws a connection error, or the original cable is cut or pinched during a build. It carries both the data the display reads and the power it runs on, so a bad cable can look like a dead head unit.

This is the System 2 (BES2) cable, for the original Kiox (BUI330), Nyon (BUI350), and SmartphoneHub. The newer Smart System displays, Kiox 300, Purion 200, Smartphone Grip, use a different wiring standard and will not connect to this cable.
Bosch makes this drive-unit cable in several lengths for different frame routings. We stock the 1500 mm short version; the right length depends on where the display sits relative to the motor.
If your display goes dark, throws a connection error, or the original was damaged during a build, this is the replacement. It fits System 2 drive units broadly: Active Line, Active Line Plus, Performance Line, Performance Line CX, Performance Line Speed, and Cargo Line (BDU2XX / BDU3XX / BDU4XX), paired with the original Kiox (BUI330), Nyon (BUI350), or SmartphoneHub.
It does not fit the newer Smart System (Kiox 300, Purion 200, Smartphone Grip, eBike Flow). The matching 1300 mm version is part 1270.016.824.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
Don’t see yours? Ask the team directly.
Bosch eBike System 2 (BES2). It connects a System 2 drive unit (BDU2xx / BDU3xx, Active Line, Active Line Plus, Performance Line, Performance Line CX) to a Kiox (BUI330), Nyon (BUI350), or SmartphoneHub display.
No. The newer Smart System (BES3) displays, Kiox 300, Purion 200, Smartphone Grip, eBike Flow, use a different cable. This one is System 2 only. If you are not sure which platform your bike is, email us your bike model and year and we will identify it.
Bosch builds this drive-unit cable in several lengths for different frames. The safest check is the part number printed on the cable you are replacing. Send us your bike model and that number and we will confirm before you order.
The connectors are sealed plug-ins, so the swap itself is straightforward, but routing it cleanly through the frame and re-seating the display takes care. If you would rather not open the bike up, drop it at our Brooklyn shop or ship it to us and we will handle it.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.