The Purion 200 is Bosch's compact display-plus-controller for the Smart System (BES3), with a 1.6-inch color screen and integrated control buttons in one handlebar unit. It's the simplest way to add a readable display to a Smart System bike without a separate remote. It clamps to a 22.2mm handlebar, runs on eBike Flow for ride modes and over-the-air updates, and supports eBike Lock and eBike Alarm through the app.

The Purion 200 pairs with Bosch Smart System bikes running the eBike Flow app. It will not work with older System 2 (BES2) bikes that use the original Purion or eBike Connect, so match the generation before you order.
A 1.6-inch color screen and the ride-mode buttons live in a single unit on the left of the handlebar, so you read your data and change assist levels without reaching for a separate remote.
Through eBike Flow you get adjustable ride modes, over-the-air updates, plus eBike Lock and eBike Alarm that turn your phone into a digital key. Pair it with a SmartphoneGrip if you want full navigation on the bars.
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
Only if your bike runs the Bosch Smart System (BES3) on the eBike Flow app. It will not pair with older System 2 bikes that use the original Purion, Kiox, or eBike Connect. Send us your bike's brand and model year and we'll confirm before shipping.
The clamp is sized for a 22.2mm handlebar. Loosen the clamp screw to align the display, then re-torque to spec so you don't damage the housing.
The Purion 200 itself shows ride data and assist level. For turn-by-turn navigation on the handlebar, add a Bosch SmartphoneGrip and use your phone with the eBike Flow app alongside the Purion 200.
Order it, ask us about fit, or book an install at the Brooklyn shop.