Bosch's recessed down-tube charging socket lets you top up an integrated PowerTube battery on the bike, no removal needed. It's the port that sits flush in the frame and runs by cable back to the battery, so on bikes with a deeply tucked-in pack you plug the charger straight into the frame instead of wrestling the battery out.
Available in-store and by order. Ask us and we’ll have it ready.

The socket recesses into the down tube and cables back to the PowerTube, so you plug the charger into the frame and leave the battery seated. Handy on bikes where the pack is tucked in tight or awkward to lift out.

Charging ports take abuse: bent pins, road grit, a cap that won't seal, a connection that goes intermittent. This is the replacement socket and cap kit, and it's work for a shop, so a worn port doesn't mean a dead bike.

This is the Bosch System 2 socket for BDU2XX and BDU3XX motors (Active Line, Active Line Plus, Performance Line, Performance Line CX of that era). Smart System bikes use a different socket. Tell us your bike and we'll confirm the right part.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
Don’t see yours? Ask the team directly.
Bosch eBike System 2 bikes running a BDU2XX or BDU3XX drive unit with an integrated PowerTube battery, covering Active Line, Active Line Plus, Performance Line, and the System 2 Performance Line CX. It is not the Smart System (BES3) socket. If you're unsure of your generation, send us the bike and we'll match it.
No. The Smart System (BES3) uses a different charging socket and cable. This part is System 2 only (BDU2XX / BDU3XX). Check your display and app first: eBike Flow and a Kiox 300 mean Smart System, while Intuvia, Purion, Nyon, or the eBike Connect app mean System 2.
It comes in 100 mm, 340 mm, and 680 mm versions to reach from the socket to the battery connector depending on the frame. The 100 mm version is the one we stock; if your build needs a longer run, email us and we'll source the right length.
Yes. We're an authorized Bosch service center and replace charging sockets in the shop. Email us to order the part or to book the install.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.