The in-frame harness that connects a frame-mounted Bosch PowerPack to the drive unit on Bosch eBike System 2 bikes. This is the cable that runs inside the downtube between the battery mount and the motor, not the charger and not the battery itself.
Carries power and data between a frame-mounted PowerPack and the Bosch drive unit on eBike System 2. It routes through the downtube, so a clean, undamaged cable is what keeps assist consistent.
Sold in 220, 310, 520, 820, and 1100 mm. The length has to match your frame's internal routing distance between the battery mount and the motor, which varies by model and frame size.
The 310 mm option is the Y-cable: it adds a second branch to feed an automatic-shifting drivetrain (NuVinci Harmony and similar e-shift setups) alongside the battery connection. Only choose 310 mm if your bike runs that kind of e-shift hub; the other lengths are the standard single-run frame cable.
It fits the BDU2XX and BDU3XX drive-unit generations, which covers Active Line, Active Line Plus, Performance Line, and Performance Line CX. You order it by length, from 220mm up to 1100mm, and the right one matches the routing distance on your specific frame, so measure the run (or bring the bike in) before buying.
We stock it because it's a common service part when a frame cable gets pinched, corroded, or damaged during a battery swap. Replacing it means opening the motor housing and battery holder, so unless you're confident with that work, it's best left to a shop.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
Don’t see yours? Ask the team directly.
It's the in-frame harness between a frame-mounted PowerPack battery and the Bosch drive unit on eBike System 2 bikes. It runs through the downtube. It is not the charger and it is not the battery itself.
The length has to match the internal routing distance on your specific frame, which changes with model and frame size, so there's no single right answer. Send us your bike's model and frame size or bring it in and we'll confirm the correct length before you order.
The 310 mm option splits to feed an automatic-shifting drivetrain (NuVinci Harmony and similar e-shift hubs) in addition to the battery connection. Choose it only if your bike uses that kind of e-shift system; otherwise pick the single-run length that matches your frame.
No. This is an eBike System 2 part for BDU2XX/BDU3XX motors (Active, Performance, and Performance Line CX). Smart System (BES3) bikes use a different cable family. If you're not sure which system your bike runs, ask us and we'll check.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.