The magnet half of Bosch's slim speed sensor, the small disc-bolt part that tells the motor how fast you're going. On a Bosch Smart System bike the slim speed sensor reads a tiny magnet that rides on the rear disc rotor; the sensor counts each pass to calculate speed, and the motor uses that number to deliver assist and cut off at your bike's class limit (20 mph or 28 mph).
The slim speed sensor reads this magnet once per wheel turn to calculate your speed. That speed value is what the Smart System uses to deliver assist and to taper it off at your bike’s legal cap, 20 mph on a Class 1 bike, 28 mph on a 28 mph bike. No magnet, no speed signal.
Reach for this when the display throws a speed-sensor error, when assist drops out, or when the magnet went missing or cracked during a flat repair or wheel swap. It’s also the part to order if you’re building or rebuilding a rear wheel for a Smart System bike.

If your rear disc rotor bolts on with six small bolts, you want the 6-bolt magnet, a stainless bracket that sits under two of those bolts. This is the most common setup on the cargo and city bikes we sell.

If your rotor slides onto a splined hub and is held by a single lockring, you want the Centerlock magnet, a ring that seats under that lockring. Bosch rates the Centerlock magnet for up to five remove/reinstall cycles, so plan to replace it if you’ve had the rotor off several times.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
Don’t see yours? Ask the team directly.
Look at how your rear disc rotor attaches. Six small bolts around the rotor → 6-bolt magnet. A splined center with one threaded lockring → Centerlock magnet. If you’re not sure, send us a photo of the rotor and we’ll confirm before you order.
Any Bosch Smart System (BES3) e-bike that uses the slim speed sensor, the rear disc-mounted sensor, not the older spoke-magnet-on-a-spoke style. It’s system-specific, not bike-specific, so the same magnet works across Smart System bikes as long as the rotor mount matches.
Often, yes, a missing, cracked, or misaligned magnet is the most common cause. Before replacing it, check that the magnet is present, undamaged, and passing the sensor with the correct gap, and that the sensor cable isn’t pinched or kinked. If the magnet is gone or damaged, this is the replacement.
Bosch rates the Centerlock magnet for up to five remove-and-reinstall cycles. If your rotor has been off several times, plan on a fresh magnet to keep the fit secure.
It’s a strong magnet. Bosch advises keeping it away from pacemakers, insulin pumps, and magnetic data carriers (key cards, drives). Handle it like any rare-earth magnet.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.