This is a complete replacement Intuvia display kit for older Bosch eBikes, with everything needed to mount a fresh head unit: the Intuvia display, the handlebar control unit, the display holder with a 1500mm cable, and the mounting hardware, all in anthracite. Important fitment note: the original Intuvia runs on Bosch's older System 2 (BES2) platform, not the current Smart System, so it is not interchangeable with Intuvia 100 or Kiox 300 hardware.
Available in-store and by order. Ask us and we’ll have it ready.

The display clicks onto the contact pads up top; the attached cable carries power and data back to the Intuvia control unit. If the old holder is cracked or the cable is cut, this restores the whole connection rather than just the bracket.

Pick 1300 mm or 1500 mm to suit how your frame routes the wire to the control unit. Larger frames and internally routed cables usually want the 1500 mm; tighter cockpits take the 1300 mm. When in doubt, measure the run the old cable took.

This is a System 2 part. Smart System bikes use the Intuvia 100, which has its own holders and is not interchangeable. If your bike has the eBike Flow app and a USB-C charge port, you are on Smart System and need the Intuvia 100 holder instead.
Reach for it when the original holder is cracked, the cable is damaged, or you're rebuilding an Intuvia cockpit. Match the cable length to your frame's routing (1300 mm or 1500 mm), and note that the kit ships with clamp hardware and spacers for 22.2, 25.4, and 31.8 mm handlebars.
It fits classic System 2 drive units only (Active Line, Active Line Plus, Performance Line, Performance Line CX), so it's the wrong part for a Smart System bike running the Intuvia 100 or the newer Nyon. We service Bosch as an authorized dealer, so if you're unsure which generation your bike is, send us the drive unit number and we'll confirm the fit before you buy.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
Don’t see yours? Ask the team directly.
It fits classic Bosch eBike System 2 bikes (BDU2XX / BDU3XX drive units: Active Line, Active Line Plus, Performance Line, Performance Line CX) that use the classic Intuvia or Nyon display. It does not fit Smart System bikes, which use the Intuvia 100 and its own holder. It also does not fit 2019-and-later Gazelle bikes. If you are not sure which generation you have, email us the drive unit number and we will confirm.
Only the cable length that runs from the holder to the control unit. Choose the length that matches your frame and cable routing; both hold the display the same way.
No. This is the holder and cable only. The Intuvia head unit, control unit, and any spacers are sold separately.
No. The Intuvia 100 is a Smart System (BES3) display with a different mount. This holder is for the classic System 2 Intuvia and Nyon. Email us to order or to confirm your generation before buying.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.