This cable powers a Bosch-system headlight from the bike battery, so there is nothing separate to charge. A keyed blue Bosch plug connects to the drive unit and bare red and black leads connect to the light.

The OEM cable between the Bosch drive unit light port and the headlight. The part to order when a factory light cable is cut during a frame service, gets damaged, or you are wiring a new integrated front light onto a Bosch build.
A hardwired Bosch light draws from the same battery that runs the motor, so there is nothing to charge separately and the light switches from the bike controller instead of a button on the light.
The 200 mm pigtail suits a light mounted close to the motor or a short jumper. The 1400 mm and 1600 mm runs route from the drive unit up to a fork-crown or handlebar headlight on a full-size frame.
The keyed blue plug only seats into the Bosch light port one way. The light end is two bare tinned leads, red positive and black negative, that connect to the light per its wiring.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
Don’t see yours? Ask the team directly.
It connects a Bosch-system headlight (and a compatible tail light) to the light port on the Bosch drive unit, so the light runs off the eBike battery. The blue plug goes into the motor light port; the bare red/black leads wire to the light.
It depends on how far the light is from the motor. The 200 mm is a short pigtail for a light near the drive unit; the 1400 mm and 1600 mm route up to a fork-crown or bar-mounted headlight on a full-size frame. The 1600 mm is the Smart System (BES3) length. If you are unsure, tell us your bike and where the light mounts and we will spec the run.
It fits Bosch drive units that have the standard blue light port, which covers most lighted Bosch builds across BES2 and the Smart System (BES3). The plug is keyed so it only seats one way. The variable is the routing length, not the connector, so confirm the length and we will confirm the port.
It is the Bosch-side cable. The light end is bare red/black leads, so it works with eBike lights wired to the Bosch light port (Supernova, Busch+Müller, and other 12 V Bosch-system lights). It is not for USB-charged lights, which have their own battery and no Bosch plug.
Yes. We route the cable, get the polarity right, and weatherproof the connection as part of a service. Email us to order the right length or to book the work.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.