The display cable is the wire that runs from your Bosch Smart System display to the control unit, sold by length so you can route it cleanly on your own bike. It carries data between the display head (Kiox 300, Kiox 500, Purion 200, or SmartphoneGrip) and the part it talks to on the cockpit, usually the System Controller, a Mini Remote, or an LED Remote.
We do not have a live stock feed for this one. Ask us and we check with the brand or our distributor, then confirm the price and the date with you before anything is charged.
This is the data link between the Smart System display and the control unit on your bar. The display reads the motor and battery and shows your mode, speed, and range through this cable.
Cockpits differ bike to bike, so Bosch sells the cable in set lengths instead of one universal wire. You pick the length that matches how far the cable has to run on your frame, with no excess loop left dangling.
Relocating a Kiox or Purion to a new spot on the bar, or switching to a different Smart System display, often changes the routed distance. A new cable in the right length finishes the job cleanly.
If a cable was pinched at the stem, cut, or stopped passing data, this is the direct replacement. Match the length to what came off the bike.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
Don’t see yours? Ask the team directly.
It carries data between your Smart System display (Kiox 300, Kiox 500, Purion 200, or SmartphoneGrip) and the control unit it talks to on the cockpit, typically the System Controller, a Mini Remote, or an LED Remote.
Measure along the path the cable actually follows from the back of the display mount to the control unit, not in a straight line, then round up to the next available length. We carry 250 mm, 400 mm, 1500 mm, and 2000 mm and can confirm the right one for your bike.
It fits Bosch Smart System (BES3) bikes only, the 2022-and-newer generation that runs the eBike Flow app. It does not fit the older Classic Line system. If you are unsure which generation you have, send us your bike and display and we will check.
No. This is the low-voltage data cable that links the display to the control unit. It is not a battery charger and not a power cable to the drive unit.
Yes. We service Bosch Smart System bikes, so email us your bike model and which display you run and we will confirm the correct length and connector before you order.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.