The internal harness that links a frame-integrated Bosch PowerTube battery to the drive unit on eBike System 2 bikes. This is the wiring loom that runs inside the downtube on the previous-generation ("Classic Line", BES2) Bosch platform, carrying both power and data between a PowerTube 500 Wh or 625 Wh battery and the motor.
Available in-store and by order. Ask us and we’ll have it ready.

On eBike System 2 bikes the PowerTube sits in the downtube and talks to the motor through this internal loom. It moves both the high-current battery feed and the communication signal the system uses to manage assist, so a failing cable shows up as dropped assist, a battery-not-recognized error, or intermittent power.

Reach for this when a BES2 bike is throwing a battery-communication code, losing assist intermittently, or when a cable got pinched or nicked during a battery or motor service. Match the length to your frame: Propel stocks the 520 mm and 1200 mm; Bosch also makes 220, 310, 410, 820, and 950 mm for other frame sizes and battery positions.
This is the previous-generation Bosch cable. It fits PowerTube 500 Wh and 625 Wh batteries running Active Line, Active Line Plus, Performance Line, or Performance Line CX motors.
Routing this cable means opening both the motor housing and the battery holder, so it is dealer-level work for most riders. You will want Torx drivers, a crank puller, and a lockring tool.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
Don’t see yours? Ask the team directly.
eBike System 2 (the previous-generation Classic Line / BES2 platform) with PowerTube 500 Wh or 625 Wh batteries and Active Line, Active Line Plus, Performance Line, or Performance Line CX motors. It does not fit Smart System (BES3) bikes; those use a different cable.
It connects the frame-integrated PowerTube battery to the drive unit, carrying both power and the communication signal between them. A bad cable typically shows up as intermittent assist or a battery-communication error.
It depends on your frame size and where the battery sits. The right length matches the routing of the original cable; if you are unsure, match the part to what came out of the bike or email us with your bike model and we will confirm.
It is a real job; the motor housing and the battery holder both have to be opened, so plan on Torx drivers, a crank puller, and a lockring tool. Most riders bring it to a shop. As an authorized Bosch service center we route these cables for customers.
The 520 mm is Bosch 1270.016.533 and the 1200 mm is Bosch 1270.016.534. Both are eBike System 2 PowerTube cables.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.