This is the 200mm Bosch power-supply cable that taps the eBike system to run a third-party component, most often an aftermarket headlight or taillight, off the bike's main battery instead of its own power source. It's a wiring part, not a powered accessory, so there's nothing to pair or configure.

Runs an aftermarket light or accessory from the Bosch eBike battery, so you skip a separate power source. The 200mm length covers a short run from the system connector to the component.
Bosch wiring is platform-specific and the connectors differ between the older System 2 (BES2) and the current Smart System (BES3). Confirm your motor and display generation so the plug matches, we'll verify it for you.
Smart System and the prior generation do not interchange. Our Bosch reference is the same set of pages our service team works from.
It lets a third-party component, typically an aftermarket headlight or taillight, draw power from the Bosch eBike system rather than its own battery. The 200mm length suits a short routing run.
It depends on your platform. Bosch connectors differ between System 2 (BES2) and the current Smart System (BES3). Send us your motor and display model and model year and we'll confirm the right cable before anything ships.
Routing and connecting the cable is straightforward for someone comfortable with eBike wiring, but the component it powers must be compatible with the Bosch system's output. If you're unsure, our Brooklyn service team can fit and verify it.
Order it, ask us about fit, or book an install at the Brooklyn shop.