Wheelsets and replacement spokes for the bikes we sell. Most service is wheel truing, not full replacement, but when a rim cracks we have the parts.

58 products

Alex’s DH19 is the disc-brake workhorse rim we lace onto everyday commuter…

A 27.5-inch, 32-hole disc-brake rim from Alexrims, for building or rebuilding a wheel.

A complete 20-inch front wheel for the MK1-E.

A DT Swiss 350 Hybrid rear hub built for e-bikes, in 12 x 148mm Boost spacing…

The E 1800 Spline 30 is DT Swiss's endurance road wheel built for real roads, rougher…

The R 460 is DT Swiss's do-everything road disc rim, wide enough for modern tires…

The Revolution is DT Swiss's light, butted spoke, drawn down to 1.5 mm through…

This is the rebuild kit for DT Swiss hubs that use the 3-pawl freehub, the classic…

A box of 100 DT Swiss brass spoke nipples, 2.0 x 12 mm, in black.

DT Swiss's X 412 is a sleeved 27.5 in (584 mm) disc-only rim, 32 holes, 22.5 mm…

The 6804 is a very common cartridge bearing size in bikes.

A Ryde HL32 rim in 28 in (635 mm) with 36 holes, the polished single-wall rim listed…

A red rim strip for 20-inch rims from Odyssey.

Rim strips line the rim bed so the spoke nipples can't wear through your tube.

A rim strip for 29-inch rims, 18 mm wide.

A rim strip for 700c rims, 16 mm wide.

A spacer kit from Problem Solvers that fits a 100 mm front hub with a 6-bolt rotor…

The 9 x 1mm front outer axle nut with a built-in rotating washer, sold each.

This is a shop-built front wheel from Quality Wheels.

A 29" rear wheel built on a Shimano Deore M610 hub with a DT Swiss 533d rim, set up…

A tubeless-ready 27.5 rear wheel that pairs WTB's ST Light i29 rim, 29mm internal…

A 29-inch rear wheel built on a WTB ST i23 tubeless-ready rim, 23 mm wide inside…

This is Robert Axle Project's Lightning bolt-on thru-axle for the rear of a 12mm…

The front thru-axle for a RockShox Bluto fat-bike fork.

The front thru-axle that bolts your wheel to a Boost fork.

Black Sapim Race spokes with the 2.9 mm neck a Speedhub flange needs, 37 to a pack…

Silver Sapim Race spokes made for the 2.9 mm neck required by a Rohloff Speedhub…

A Ryde Andra rim in 26-inch, 36-hole drilling, spec'd for Urban Arrow cargo bikes.

Salt's PG spokes are plain-gauge 14-gauge (2 mm) steel, the straightforward BMX spoke…

The Sapim Race is the spoke most wheelbuilders reach for first.

Brass nipples shrug off weather and hold tension longer than alloy on a hard-working…

This is a Shimano Deore FH-M6000 rear hub.

A Shimano Deore rear hub, 32-hole, for quick-release axles at 135mm spacing.

A Shimano Deore XT HB-M8110-B front hub: center-lock, 32-hole, for a 15mm thru-axle.

Shimano's FH-TX500 rear hub: 32-hole, 135 mm, nut-type threaded axle, rim brake…

A Shimano hub cone with seal rings, part Y25W98020, listed as the front cone…
We can get far more than what's in the shop. Send us a message and we'll help you find it.