Black Sapim Race spokes with the 2.9 mm neck a Speedhub flange needs, 37 to a pack with matching black nipples. They're for building or re-lacing a 32- or 36-hole Speedhub wheel, and the one thing that matters is length, which comes from your rim's ERD and lacing pattern.
Available in-store and by order. Ask us and we’ll have it ready.

Speedhub flanges call for a 2.9 mm spoke neck. These are Sapim Race spokes finished to that spec, so the heads seat properly and the wheel holds tension.

Rohloff asks for flange support rings whenever a Speedhub wheel is laced or re-laced, especially on cargo bikes, touring bikes and e-bikes. Fit them while the spokes are out.
Spoke length comes from your rim's ERD, the hub and the lacing pattern. Give us those and we'll calculate it; if your length falls between stock sizes, Rohloff's Cut & Roll spokes are made to measure.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Its flanges need a 2.9 mm spoke neck. These Sapim Race spokes are made to that spec.
It depends on your rim's ERD (effective rim diameter) and the lacing pattern. Send us both and we'll work it out.
Yes, matching black 14 mm Sapim lock nipples.
Yes, for a 32- or 36-hole Speedhub, with spares.
Rohloff asks for them on every lacing or re-lacing. Which set (8523 or 8524) depends on your hub, so send us a photo of the "made in Germany" marking on the shell.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.