A DT Swiss 350 Hybrid rear hub built for e-bikes, in 12 x 148mm Boost spacing with a 6-bolt rotor mount, Shimano HG 11-speed MTN freehub, 32 spoke holes, and 24-point ratchet engagement. The "Hybrid" designation means the internals are rated for the extra torque and weight of a mid-drive or hub e-bike. This is a wheelbuild-level part, so it's for shops and riders speccing or rebuilding a rear wheel rather than a bolt-on upgrade.

The Hybrid version of the 350 hub is reinforced for e-bike duty, where motor torque and added system weight put more load on the freehub and ratchet than an analog drivetrain would.
Built for 12 x 148mm Boost thru-axle rear spacing with a 6-bolt disc rotor mount. Confirm your frame's rear spacing and axle standard before ordering.
The HG 11 MTN freehub body takes Shimano/SRAM HG 11-speed mountain cassettes. It's a 32-hole shell with 24-point ratchet engagement for the wheelbuild.
It's a 12 x 148mm Boost rear hub with a 6-bolt rotor mount and a Shimano HG 11-speed freehub. Check that your frame uses Boost rear spacing and that your cassette is 11-speed HG before ordering. If you're not sure, send us your bike or wheel details and we'll confirm.
DT Swiss adds 'Hybrid' to hubs validated for e-bike use. The internals are rated for the higher torque and weight that a mid-drive or hub motor puts through the drivetrain.
No. This is the rear hub only, a 32-hole shell with 24-point ratchet engagement meant to be laced into a wheel. You'll need rim, spokes, and a build. We can quote the full wheelbuild if you'd like.
Order it, ask us about fit, or book an install at the Brooklyn shop.