Transporting your eBike by vehicle
How to transport a 60-plus-pound e-bike by car: choosing a rack rated for the weight, loading it safely, and when a hitch and trailer make more sense.
A bike rack makes road trips, trailhead runs and shop visits a lot easier, but only if it's rated for the weight. Most of our bikes weigh around 55 lb with the battery out, and a rack that can't hold that is dangerous at highway speed. For the biggest cargo bikes, a tow hitch and trailer is usually the better way to go.
Here's what to look for in a rack.
1. Can it hold 60 lb or more per bike? E-bikes are heavy, so even with the battery off you're still hauling around 55 lb.
2. Is it low to the ground? The lower the rack, the less you have to lift. Some come with a ramp.
3. Does the bike sit on wheel chocks? Racks that hold the tires in trays keep the weight off the frame, hold the bike steady while you strap it, and keep bikes from banging into each other or the car. They also work with step-thru frames like the Gazelle Ultimate C380 and Riese & Müller Nevo, which have no top tube for a hanging rack to grab.
4. Does it clear fenders and racks? Most of our bikes have both, so make sure the rack clamps somewhere that works around them.
5. Can you lock the bikes to it? If you'll ever walk away from the car, you'll want the bikes secured. The racks we recommend include locking systems.
Hitch-mounted racks
Hitch racks pass all five better than roof or trunk-strap styles. The hitch ties into the vehicle's structure, so it carries more weight and soaks up rough road better. Hitch racks also sit lower, so you lift less, and some include a loading ramp.
Racks we recommend
Good racks aren't cheap, but you're paying for how well they're built.
Thule
The Thule Easyfold XT uses wheel chocks and holds two bikes, 65 lb per tray. The trays adjust for different wheelbases and tire widths and clamp the frame, so fenders and racks stay clear. It comes with a loading ramp, folds up compact for storage, and rolls on built-in caster wheels (the rack weighs 40 lb). Use the Bosch Walk Assist to drive the bike up the ramp, and make sure the ramp is fully clicked into the rack before you use it.
It's worth adding a license plate holder for the outermost bike, or an extra-long ramp for a taller SUV or camper van.
The Thule T2 Pro XTR is similar at a slightly lower price, with 60 lb trays. It works well for a lighter e-bike like a Gazelle.
Küat
Küat makes a range of hitch racks that meet our criteria. The NV Base 2.0 covers two e-bikes. The NV 2.0 adds a built-in bike stand ("The Trail Doc") for parking-lot repairs. The Piston Pro-X has integrated lights that connect to your car's, pneumatic arms to help lift bikes into place, and it's RV-compatible.
Velocirax
Velocirax racks may work for an e-bike without fenders (or with easily removable ones) that weighs 55 lb or less with the battery off.
1Up USA
The 1Up Super Duty Double is machined in the USA and was suggested to us by a customer. It meets our criteria at a slightly lower price and offers a ramp and fender cushions. We haven't tried it ourselves yet.
A few tips before you load
Take the battery off before you go. It lightens the load, cuts down on bouncing and keeps the bike from turning on in transit.
Then cover the exposed battery contacts, especially for long or off-road drives. Riese & Müller bikes with internal batteries have their own transport covers, available at Propel or any R&M dealer. For every other bike, Bosch makes pin covers for about $3 each. To protect the open frame slot where an internal battery was, wrap it with a towel or throw a cover on the bike.
A bike cover also keeps off dust, weather, and road grit, and adds a theft deterrent if you park and walk away. More on covers here.
If you have a rack or setup you'd recommend, we'd love to hear about it.
Still stuck, or is this about your own bike? The service team answers these all day.