Skip to content
Fort Greene showroom · Mon–Sat 9–5 · Sun 10–3Mon–Sat 9–5Call or text 646-736-7716Free test rides

Adjusting handlebars & stem for a personalized ride

Set your bar and stem, and cure front-end shudder by properly tightening a loose threadless headset with the top-cap compression bolt.

Tips for adjusting your handlebars, stem, and headset

Adjusting your handlebars and stem can leave the headset bearing assembly slightly loose. You'll feel it as a shudder or vibration at the front end, most noticeable under the front brake. The fix is to tighten the whole headset bearing assembly.

How to tighten the headset bearing assembly:
  • Loosen the bolts on the side of the stem, allowing the stem and handlebars to pivot freely on the fork tube.

  • Snug the top cap bolt (the compression bolt) a little at a time to pull the fork up toward the stem and remove play in the steering bearings. Go gently: the top cap only sets bearing preload, so a light turn is usually all it takes. No need to remove or grease the bolt, and over-tightening it will bind the steering.

  • Re-tighten the stem clamp bolts to the torque marked on the stem, and check that the bars turn smoothly with no front-end knock.

  • If a light preload turn won't take the play out, or the bearings feel notchy or the headset needs to come apart, bring it to the shop rather than disassembling it yourself. Full headset service (removing, cleaning, and greasing the assembly) is a job for our service team.

  • If the headset does start to come apart, on purpose or by accident, keep track of the small pieces; you can't tighten a headset without all of them.

For a more detailed explanation of how to adjust a headset, refer to this link: https://www.parktool.com/blog/repair-help/threadless-headset-service

You can also follow along with this video tutorial for headset troubleshooting, courtesy of Park Tool:

More in Service & maintenance

Still stuck, or is this about your own bike? The service team answers these all day.