How do I use the Shimano Nexus Hub(s)?
How to ride and fine-tune a Shimano Nexus internal hub: shifting basics, reading the yellow adjustment marks, and correcting shifting with the barrel adjuster.
The Shimano Nexus is an internal gear hub, so the gears live sealed inside the rear wheel, protected from moisture and dirt, with a numbered twist shifter on the bar. It's low-maintenance and simple to ride, but it likes to be shifted a little differently from a derailleur.
Shifting it
- Shift with a numbered twist grip. Lower numbers are easier gears, higher numbers are harder. The number in the window is the gear you're in.
- Ease off the pedals for a moment as you shift. The Nexus shifts best with light or no pedal pressure. If you keep pushing hard, there's a brief delay and the hub drops into gear once you ease off. You can shift while coasting or stopped, which makes starting in the right gear easy.
Fixing lazy or missed shifts
If the hub feels a little off, hesitating or not landing cleanly, it usually just needs the cable re-tensioned, and you can do it yourself:
- Shift into the adjustment gear (gear 4 on most Nexus hubs).
- Look at the two yellow marking lines in the little window on the hub. When the cable tension is right, they line up exactly opposite each other in a straight line.
- If they're offset, turn the barrel adjuster on the shifter until the lines match up.
That's generally the one adjustment you'll ever need to make. The video below and the linked manual walk through it.
_Check out the user's manual for more details._
Still stuck, or is this about your own bike? The service team answers these all day.