Riese & Müller parts and accessories.
Frame hardware, mounts, fenders, child-seat plates, battery covers, and the parts that only fit R&M. Factory-direct supply.
Riese & Müller accessories and parts

The belt guard for the Delite III.

The polypropylene cargo box for the Packster 80.

The cable tension tester.

The rain-and-wind cover that snaps over the Packster 60 box to keep kids dry.

The two-seat bench that turns a Packster 60 or 80 box into a two-kid hauler.

The front carrier for the Supercharger.

The front light bracket, in black.

The high side walls for the Load 75 box (MY2020).

The taper mount that holds a front lamp on Riese & Müller cockpits, with the fixing hardware included.

The rigid, lockable lid for the Load 75 cargo box (MY2020).

The full fender set for the Roadster GT (up to MY2020).

The pannier rack for the Delite and Superdelite (MY2020).

The passenger kit for the Multicharger longtail (up to MY2020).

The steering linkage kit for the Load 60.

The 40 mm swingarm bearing for the Load from MY2020.

The 35 mm swingarm bearing kit for the full-suspension rear end.

The transport cover for the Roadster PowerTube 625 battery (MY21).

The rear-rack reflector, Busch & Müller 313/3Z, for R&M rear racks.

A 130 cm hardened-steel chain lock from ABUS, spec'd for Riese & Müller riders who want enough length to lock through…

A Riese & Müller trailer-hitch adapter that lets you couple a cargo or passenger trailer to a compatible R&M bike.

An extra 130 cm hardened-steel chain lock made for the Riese & Müller Load cargo bike.

A pouch Riese & Müller developed with Vaude to carry the additional chain lock on the bike, so the chain is with you…

Replacement battery cover for Riese & Müller frames that carry a vertically mounted Bosch PowerTube 500Wh battery in…

This is the frame cover that conceals a horizontally mounted Bosch PowerTube 625 battery on a Riese & Müller e-bike.

This is the replacement battery cover for Riese & Müller frames running a vertically mounted PowerTube 625Wh battery.

A Bibia luggage strap sized for Riese & Müller rear racks, for holding bags, boxes, or loose cargo down on the rack…

This is the twin-leg (bipod) center stand for the Riese & Müller Multicharger, model year 2021, Rohloff trim.

This is a single Torx T15 mounting screw (3.5 x 12 mm) used in the Bosch BES3 carrier-battery mount on Riese & Müller…

A Riese & Müller cable extension set that lengthens the wiring run to your front light, for builds where the standard…

Riese & Müller's frame-mounted front carrier for the Multicharger and Multitinker, with a suspended deck that keeps…

Riese & Müller's rear cargo bags, sized to the rack: one build for the Multicharger (MY2021 on) and a separate one for…

A rear cargo carrier (rack) made for the Riese & Müller Tinker.

A weather cover that shields a child riding in the cargo box, cut to fit Riese & Müller's Load 60, Load 75, and…

The retrofit kit of aluminum sleeves that reinforces the glass-fiber bars on a Load 75 child cover.

Replacement fiberglass support rods (with end cap) for the child cover canopy on the Riese & Müller Load 60 and…

The DIN 472 circlip for a 23 by 1.2 mm bore.

This is Riese & Müller's Comfort handlebar, a swept-back bar with a 25.4 mm (1 in) center clamp that fits R&M cockpit…

A 31.8mm-clamp comfort handlebar set up as original equipment on the Riese & Müller Swing/Nevo-class Satori Noirette…

A complete weather-cover set made specifically for the Riese & Müller Multitinker, R&M's most compact 20-inch longtail.

This is the FSA CK-745 crankset for Riese & Müller e-bikes, in a 170mm arm length with the Bosch motor interface (B/IS…

The Riese & Müller seat cushion for the rear carrier of the Multicharger, so a passenger has a padded place to sit.

The R&M Dog Kit turns the cargo box of a Riese & Müller Load 60 or Load 75 into a secure spot for your dog: a cushioned…

This is the factory Riese & Müller double child seat that turns a Load or Packster cargo box into a two-kid setup.

Replacement feet for the cargo kickstand on a Riese & Müller Load or Packster.

This is a Spinner Grind OS suspension fork in black, sized for a 20-inch wheel, supplied as a Riese & Müller…

Riese & Müller's frame-fixed front rack: a steering-independent 11 lb (5 kg) shelf for a bag or crate on select R&M…

Riese & Müller's front carrier for the Culture GT.

This is the mounting bracket that holds a Riese & Müller front light on a tapered (cone-shaped) fork steerer.

A front luggage shelf made for the Riese & Müller Load 75, the brand's front-loader cargo bike.

A box accessory made specifically for the Riese & Müller Load 60 front-loader.

The Satori handlebar that Riese & Müller fits to its bikes at the factory, sold as a genuine replacement.

A replacement/add-on headrest for the in-box child seat on the Riese & Müller Packster 70 front-loader.

These are the tall polypropylene wall panels that turn the open, low-wall front cargo area of a Riese & Müller Load 60…

This is the handlebar horn button switch for Riese & Müller e-bikes from model years 2017, 2018, and 2019.

A Spanniga horn sized to fit Riese & Müller bikes, so you can add the audible signal that most state and local traffic…

A replacement kickstand sized for the Riese & Müller Load 75, the front-loader cargo bike.

A small mounting bracket that holds a front light off a Riese & Müller front carrier so the beam clears the load.

A front-end bracket made for the Riese & Müller Load 75 front-loader cargo bike.

A stainless-steel belt tensioner pulley with a sealed industrial bearing, sized for the belt-drive system on Riese &…

A replacement cushion for the cargo area of the Riese & Müller Load front-loader.

These are the low-profile cargo-box side panels for the Riese & Müller Load 60 and Load 75 front-loader.

A lockable hard lid for the front cargo box of the Riese & Müller Load 60, sized for the MY2020 generation.

A rear luggage shelf made for the Riese & Müller Packster 70 front-loader, giving you a flat carrying surface over the…

A magnetic snap-on cover that protects the charging port on a range of Riese & Müller e-bikes, including the Charger4…

A model-specific Riese & Müller bracket that bolts into a compatible cargo box and holds the specified Maxi-Cosi…

Riese & Müller's factory fender sets, one pair per bike and frame variant.

A replacement SKS U-stay fender (B355) for Riese & Müller bikes that keeps road spray off you and the rider behind you.

An adjustable clamp that secures a fender to a Riese & Müller frame, fitting a range of tire widths and clearances.

A replacement fender holder that mounts a front fender to a Fox suspension fork on Riese & Müller bikes.

This is the factory narrow reflector kit for the model-year 2021 Riese & Müller Packster 70 cargo bike: a white…

The full fender set for the Nevo 27.5 dual-battery (from MY2021).

A retrofit kit that adapts a Riese & Müller that shipped with a Kiox or SmartphoneHub cockpit to take Bosch's Nyon…

A belt snubber for the Riese & Müller Packster (Vario variant 2) belt-drive system.

This is Riese & Müller's Passenger Kit for the model-year 2021 Multicharger: a foam seat cushion, stoker handlebar to…

Riese & Müller's own flat pedal, made by VP, with a griptape surface for grip in everyday shoes.

A factory pair of VP-183 platform pedals as fitted to Riese & Müller bikes.

A model-specific transport cover for the Riese & Müller Homage, made to fit Homage builds from model year 2021 onward…

A snap-on transport cover that closes off the PowerTube 750 battery bay when the battery is out, made specifically for…

A padded transport cover for the horizontal PowerTube 750 battery on the Riese & Müller Nevo4 (model year 2023 and…

A protective cover panel that mounts below the rear cargo area on the Riese & Müller Multicharger, keeping passenger…

This is a Riese & Müller "Protection Below" part made specifically for the Multitinker longtail, not a universal fit.

This is the Protection Complete rack assembly for the Riese & Müller Multicharger longtail, the rear carrier that…

A protection top that fits the rear cargo rack on Riese & Müller's Multicharger and Multitinker longtails, giving you a…

A replacement belt-drive pulley component for Riese & Müller bikes built around a carbon belt and internal hub gear.

A 40mm quick-release seat post clamp for Riese & Müller bikes, sized to a 40mm seat-tube outer diameter.

An adjustable-angle handlebar stem from Riese & Müller, fitted to the Load, Tinker, and Kendu platforms.

A belt-drive tensioner pulley assembly for the Riese & Müller Load front-loading cargo bike.

A 34.9mm seatpost clamp in black, sold as a Riese & Müller replacement part.

This is the bolted 40.0 mm seatpost clamp in black for Riese & Müller bikes, the band that pinches the seat tube to…

A stem riser made for the Satori Custom adjustable stem on Riese & Müller bikes, used to raise the handlebar height for…

Riese & Müller's rear rack, sized and drilled per bike: the Delite and Superdelite run a 27.5 in version, the Load and…

A 27.5-inch RODI TRYP35 disc-brake rim, 32 spoke holes, drilled for Schrader (AV) valves, used as a wheel-build…

A railing and handhold kit that turns a Riese & Müller Multicharger or Multitinker rear deck into a real seat for a…

This is the adjustable-angle stem Riese & Müller specs on its comfort and touring bikes, the part that lets you tilt…

A quick-release seatpost clamp for Riese & Müller bikes, sized for a 34.9 mm clamp diameter in black.

This is a Cane Creek New Thudbuster ST short-travel suspension seatpost, supplied as the Riese & Müller-spec…

Mounting hardware for Riese & Müller cargo bikes: a set of bolts and threaded bosses that add a "Short Fabric"…

A side-mounted cargo carrier made for the Riese & Müller Multicharger longtail, it bolts to the bike's rear rack to…

A forward-facing front child seat with its own 5-point harness, plus the matching footwell, built specifically for the…

A single front-facing child seat that drops into the EPP box of a model-year 2023 Riese & Müller Packster 70.

An in-box single rear child seat that turns the back of your Riese & Müller front-loader into one passenger spot, no…

A right-side cargo rack slider for Riese & Müller, in the 148 DA spec.

The snubber is a small belt-guide part that keeps the Gates belt seated on the rear sprocket so it can't skip or jump…

A handlebar cockpit spacer sized for the Riese & Müller Satori, with a 25.4mm clamp diameter.

A replacement coil spring for the X-Fusion rear shock on full-suspension Riese & Müller bikes, rated at 1150 lbs/inch.

A replacement steering linkage kit for the Riese & Müller Load 75 front-loader, the geometry that ties the handlebar to…

A weatherproof cover for the cargo bed on Riese & Müller's front-loaders, cut to the bike's exact deck: Load 60, Load…

Color-matched touch-up paint to cover frame chips and scratches on your Riese & Müller, ordered to your bike's exact…

A snap-in cover that seals your Riese & Müller's empty PowerTube 500Wh battery bay against water, grit, and snow when…

Riese & Müller's molded cover that closes the downtube slot when you pull the 625 Wh PowerTube to transport or store…

A molded cover that fills the empty PowerTube 625 slot on a Homage4 when the battery is out, sealing the cavity from…

A 150 cm Trelock lock chain sold for Riese & Müller bikes, it extends the security of a frame-mounted lock so you can…

A two-seat child bench with rear wall, built specifically for the Riese & Müller Load 60 model-year 2020 box.

A replacement wheel guard (spoke protector) sized for the Riese & Müller Multicharger longtail.

The child cover for the R&M cargo box.