A Riese & Müller replacement part for vario and HS models, tied to the rear-rack mounting area. Because R&M parts are model- and model-year-specific, the right call is to confirm fit before you order.
The snubber (R&M also calls it the "Pebble") sits at the rear sprocket and stops the belt from climbing or jumping off when tension drops or the bike hits a bump. On a belt-drive hub-gear bike it's a small part that prevents a frustrating, ride-ending drive loss.
The two options here are not interchangeable. The vario/HS version fits older belt-drive generations (Charger 2/3/4, Supercharger 1/2, Load 1/2, Delite 3).
This is an original Riese & Müller spare, not a generic aftermarket guide. That matters here because the geometry has to line up precisely with the frame mount and sprocket for the belt to track correctly.
You buy a snubber to replace a worn or cracked one, or to fix belt skip, it doesn't add performance. If your belt is also old or the issue is tension, address those at the same time.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Go by model and year. The vario/HS option covers older belt-drive generations like Charger 2/3/4, Supercharger 1/2, Load 1/2, and Delite 3. The variant 2 option covers newer Vario-platform bikes such as Homage 3, Load 75 (2/3), Nevo4, Transporter, and Carrie. If your bike isn't on either list or you're unsure, tell us the exact model and model year and we'll confirm before you order.
They differ by the hub/drivetrain platform and generation they were designed around, which changes the mounting and how the part sits against the sprocket. They look similar but are not cross-compatible, fitting the wrong one can let the belt skip or won't mount correctly.
Often, if the cause is a worn or missing snubber. But belt skip can also come from low belt tension or a worn belt/sprocket, so check those too. If you're local, we can look at the whole rear-drive setup rather than just swapping the part.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.