Velocity's burly touring-and-cargo rim: a 25 mm-wide aluminum hoop with short, stout sidewalls built to shrug off potholes and heavy loads. We reach for the Cliffhanger when a customer is building or rebuilding a wheel that has to carry weight, a loaded touring bike, a tandem, or a heavy e-bike or cargo setup, and strength matters more than shaving grams.

The Cliffhanger is a 6063-T6 aluminum rim with a 25 mm internal width and short, deep sidewalls. Propel stocks the black, non-machined-sidewall version in 36-hole drilling, which is the disc-brake build, for both 26" and 700C/29er wheels.

The short, stout sidewall is the whole point: it guards against pinch flats and against denting from a pothole or a hard landing, the failures that bend a lighter rim out of true. The 25 mm internal width supports a wide tire so it doesn't squirm under load.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Propel stocks the Cliffhanger in 26" (559) and 700C/29er (622), both in 36-hole drilling for disc brakes. The rim has to match your wheel size, your hub's spoke count (36H here), and a disc-brake hub. If you're not sure what your bike uses, email us your bike or your hub and we'll confirm the right rim and lace it up.
No. The Cliffhanger is the rim only, a wheel-build component. It needs a hub, spokes, and nipples, then it gets laced and tensioned into a wheel. We do that wheelbuild in-house, so the simplest path is to send us your hub (or the whole bike) and we'll build it.
Yes. The Cliffhanger is tubeless-ready and only needs a thin tubeless rim tape and a tubeless-compatible tire and valve. It also runs fine with a standard tube and Presta valve if you'd rather not go tubeless.
That's what it's for. The deep, stout sidewall and 36-hole drilling are rated for tandem and loaded touring, so it stands up to heavy e-bike and cargo loads where a lighter rim would dent or go out of true. Email us to order or to spec a full wheelbuild.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.