A rear direct-mount kickstand from Ursus that bolts to a dedicated mounting plate behind the bottom bracket, with an 18mm bolt pattern. The King Evo is built for the kind of frames that come with a direct-mount interface, so confirm your bike's mount style and bolt spacing before ordering. Send us your bike and we'll match it.

This stand bolts to a dedicated mounting plate near the bottom bracket or chainstay rather than clamping to a round tube. Your frame needs to be built for a direct-mount kickstand for it to fit.
The mounting plate uses an 18mm bolt spacing. Match that to your frame's mount or to the plate the bike was originally spec'd with before ordering.
Mounts behind the bottom bracket toward the rear of the bike, which keeps it clear of the cranks and suits loaded utility and cargo e-bikes.
Only if your frame is built for a rear direct-mount kickstand with an 18mm bolt pattern. It bolts to a mounting plate rather than clamping to a tube, so it won't fit frames that lack that mount. Send us your bike or a photo of the existing kickstand mount and we'll confirm before you order.
It refers to the bolt-hole spacing on the mounting interface. The stand has to match the plate spacing on your frame, so check your bike's spec or measure your current mount if you're replacing one.
It's a rear direct-mount stand, positioned behind the bottom bracket rather than at the center of the frame. If you're not sure which your bike is set up for, send us your setup and we'll sort it out.
Order it, ask us about fit, or book an install at the Brooklyn shop.