The under block of the kickstand mount on the Urban Arrow Family. The center stand pivots between an upper block and an under block, and this is the one that sits below the tube.
We do not have a live stock feed for this one. Ask us and we check with the brand or our distributor, then confirm the price and the date with you before anything is charged.
These are the molded plastic clamp blocks that hold the kickstand pivot tube under the cargo box on your Urban Arrow Family. As the plastic wears or the bolts work loose, the stand starts to feel sloppy or stops snapping up cleanly.
When the stand acts up, Urban Arrow's own first move is to back off the four bolts, check the blocks for wear, and re-torque. If the blocks are worn, this is the part you swap. Replacing them is usually the cure long before you'd ever need a whole new kickstand.
The pivot tube is sandwiched between an upper block and an under (lower) block, two blocks total, each held by two hex bolts for four bolts in all. Each block is roughly 50 x 25 x 15 mm of molded plastic.
This is the clamp block for the center (double) kickstand mount on the Urban Arrow Family. We sell and service Urban Arrow here, so if you're not sure which half you need or want it installed and torqued correctly, bring the bike in or send us a note before you order.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
They're the two halves that clamp around the kickstand pivot tube, the Upper sits above the tube, the Under sits below. They work as a pair. Order the half that's worn, or both if you're rebuilding the mount or aren't sure which one is the problem.
Usually, yes. A loose or unstable center stand on the Family is most often worn clamp blocks or bolts that have backed off. Replace the affected block(s) and re-torque the hex bolts so the stand swings smoothly with no play. If the stand itself is bent or the spring is shot, you'll need the kickstand assembly instead.
It fits the center kickstand mount on the Urban Arrow Family.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.