Teravail's Standard Schrader tube has the same wide valve as a car tire, so a gas-station air line or any floor pump fills it. It comes in 26 in and 700c sizes for rims drilled for Schrader, and the fit check is the width range on your tire: 26 × 1.75–2.35 in, or 700c at 20–28 mm or 30–43 mm.

Schrader is the wide valve with a spring-loaded pin, the same as on a car tire, so you can top it up at a gas station or with any floor pump. It needs the wider valve hole, so check your rim before you order.
Each tube covers a span of widths for one wheel size. The 700 × 30–43 mm fits a 700 × 35c or 40c commuter tire, and the 26 × 1.75–2.35 in fits a 26 × 1.95 or 2.1 city or mountain tire.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Look at the valve on your current tube. Schrader is short and wide with a pin in the middle, like a car tire. If yours is slim with a small nut on the tip, that's Presta, and you'll want Teravail's Standard tube in Presta instead.
Read the size on your tire's sidewall and pick the range that covers it: a 700 × 35c falls in the 30–43 mm tube, a 700 × 25c in the 20–28 mm, and a 26 × 2.1 in the 26 × 1.75–2.35 in.
The 26 in tube has a 48 mm valve. Teravail doesn't give a clear valve length for the two 700c sizes, so email us if your rim is deep and we'll check the box.
Teravail covers defects in materials and workmanship for 24 months. Punctures and normal wear aren't covered.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.