Teravail's thorn-resistant tube, with 4 mm of rubber under the tread to ride out goatheads, glass, and the debris in city bike lanes. It's the same fit as a normal tube, just heavier and far harder to puncture: where a standard tube runs about 0.9 mm thick, the thorn-resistant version is 4 mm thick across the tread and 2 mm at the rim, so a thorn that would flat a standard tube usually stalls in the rubber.

A standard tube is about 0.9 mm thick; this one is 4 mm across the tread and 2 mm at the rim. A thorn, staple, or shard of glass that would reach the air in a standard tube usually stops in the extra rubber, so you ride past the hazards that flat everyone else.
The point isn’t puncture-proof, it’s puncture-resistant: far fewer flats on the debris-heavy routes where you keep getting them. Worth the most on a loaded cargo or e-bike you don’t want to flip over on the curb to fix.
Goathead/sticker-burr country, glass-strewn bike lanes, gravel and dirt paths. If you replace tubes more than you’d like, the thorn-resistant version pays for itself in skipped flats.
Match the size range to your tire and the valve to your rim: 700c 28–32 mm with a 35 mm Schrader for road/gravel wheels, or 27.5 in 2.0–2.4 in with a 48 mm Schrader for trail and many e-bike wheels.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It’s the same butyl tube in a thicker gauge: 4 mm of rubber under the tread and 2 mm at the rim, versus about 0.9 mm on a standard tube. That extra thickness resists thorns, glass, and debris, at the cost of some added weight.
Fit is by size and valve, not tire brand. We stock 700c 28–32 mm (35 mm Schrader) for road and gravel wheels, and 27.5 in / 650B 2.0–2.4 in (48 mm Schrader) for trail and many e-bike wheels. Read the size off your tire sidewall (e.g. “700 x 32” or “27.5 x 2.2”) and match it to the tube’s range.
These are Schrader (the wider, car-type valve). Check your current valve or rim hole before ordering: a Schrader tube won’t seat in a narrow Presta-drilled rim. If your rim is Presta-drilled, email us and we’ll point you to the right size.
There’s real added weight from the extra rubber, so acceleration is a touch slower than a standard tube. Most commuters and e-bike riders never notice it; if you want the lightest, quickest-rolling setup, run our standard Teravail tube instead.
Yes, the Schrader valve core is removable, so you can top up with sealant or swap a damaged core without pulling the tube.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.