This is Tannus Armour in 20 × 1.75–1.95 (ISO 406), a foam insert that sits between your tire and a regular tube and cuts flats by about 90%. About 13–15 mm of Aither multi-cell foam wraps the casing so thorns, glass, and pinch flats stop at the foam instead of reaching the tube, and it lets you run lower pressure for grip without snake-bites.
Armour is a foam shell your tube sits inside. Glass and thorns hit the foam before the tube, and the foam cushions the rim against pinch flats.
The foam takes up room in the tire, so Armour pairs with a narrower tube. Tannus lists the tube size for each insert; reusing your old tube is the usual install mistake.
Put the slightly inflated tube into the Armour, tuck it under the rim, seat the tire bead and inflate. No special tools, though it takes longer than a plain tube swap.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Read your tire sidewall and pick the Armour whose range covers it, then use the tube size Tannus lists for that Armour.
No. Armour uses a regular inner tube, just a smaller one, and no sealant.
Tannus needs at least a 19 mm inner rim width.
Tannus suggests starting about 5 psi lower than usual and adjusting from there, keeping at least 15 psi in the tube.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.