This is the replacement handlebar bracket that clamps the Supernova Dual Switch to a 22.2mm bar so you can run the horn and high-beam controls. It's a fitment-specific part: it's sized for standard 22.2mm (7/8 in) bar clamp areas and pairs with the Supernova Dual Switch, not a switch on its own.
The clamp is sized for a 22.2 mm (7/8 in) handlebar grip area, the standard diameter on most bars near the grips. It's the mount only, the magnetic Supernova switch is a separate part.
The bracket slides onto the bar from the bar end or clamps in place, so you don't have to pull your grips or controls to fit it. Mount it on the left for the horn or the right for the high-beam button, wherever it falls to thumb.
The single mount holds one Supernova magnetic switch. The dual mount carries two buttons side by side on one clamp, handy if you want horn and high beam in the same place without two separate brackets eating up bar space.
It's built for Supernova's magnetic clip-in buttons used with their lighting systems (M99-series and similar). The switch clicks into the holder magnetically; this is a Supernova-specific part, not a universal switch clamp.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Choose the single mount if you only run one button (just a high beam, or just a horn). Choose the dual mount if you want both the horn and high-beam buttons grouped together on one clamp. Both fit a 22.2 mm bar.
It clamps to a 22.2 mm (7/8 in) section of bar, which is the standard grip-area diameter on most handlebars. If your bar tapers to a larger center, mount it out toward the grips where it's 22.2 mm.
No; this listing is the handlebar bracket only. The magnetic Supernova horn or high-beam button is a separate part. If you're replacing a lost bracket, your existing switch clips back into this one.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.