A thorn-resistant inner tube with a thick butyl wall, far thicker than a standard tube's, which stops most thorns and small glass shards before they reach the air chamber. On a heavy e-bike or cargo bike where roadside flat changes are a hassle, that extra puncture margin is worth the small weight penalty.

What sets it apart is the heavy-gauge butyl wall, far thicker than a standard tube's, so most goatheads, thorns, and small glass shards stop short of the air chamber. It's a quiet upgrade you only notice when the flat you'd have gotten never happens.
Pulling a wheel and swapping a tube on a loaded e-bike or cargo bike is real work. The extra puncture margin here is about avoiding that hassle on the shoulder, in exchange for a small weight penalty over a standard tube.
If you ride a heavy commuter or a cargo bike where a flat means wrestling a fully loaded wheel, the puncture protection is worth the few extra grams. If you're chasing low rotating weight on a light road build, a standard or lighter tube makes more sense and you give up some of that thorn margin.
It comes in 26 x 2.00-2.40 with a Schrader valve, 26 x 1.90-2.35 with a Presta valve, and 27.5 x 2.1-2.35 with a Presta valve. Match the size to the number printed on your tire sidewall and pick the valve that matches your rim drilling.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Read the printed size on your current tire's sidewall and match it to the range listed here. It comes in 26 x 2.00-2.40 with a Schrader valve, 26 x 1.90-2.35 with a Presta valve, and 27.5 x 2.1-2.35 with a Presta valve. Then match the valve type to the hole drilled in your rim, Schrader is the wider automotive-style valve, Presta is the narrow threaded one. If your rim is drilled for the larger Schrader, you can run either with the right rim, but a Presta-drilled rim needs a Presta tube (or an adapter grommet).
Neither. It's a standard tube-type tube that installs inside a clincher tire. There's no sealant and no special setup, it works in any tire in its size range.
Yes, the thick wall makes it noticeably heavier than a standard tube. On a pedal racing bike you'd feel it; on an e-bike or cargo bike, the motor erases the penalty and the puncture protection is the part you'll actually notice.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.