The Sun Ringle MTX33 is a 26-inch, 36-hole clincher rim drilled for disc-brake hubs, finished in black. It's a wheel-build component, not a finished wheel, so it needs to be laced to a hub and tensioned by a wheelbuilder before it can go on your bike. Send us your hub and spoke details and we'll spec the build for you.

Drilled for 36 spokes and made for disc-brake setups, so there's no machined brake track. The higher spoke count suits heavier-duty and load-carrying wheels.
Standard 26" clincher profile that runs tube-and-tire (clincher) setups. Tire width and tube sizing depend on your hub and intended use.
This is the rim only. Most rims go into a wheelbuild, so plan on a hub, spokes, nipples, and a wheelbuild service to turn it into a rideable wheel.
No. The MTX33 is the rim by itself. To ride it you'll need a matching disc hub, spokes, and nipples, plus a wheelbuild to lace and tension it. We can quote the full build if you send us your hub and bike details.
It's a 26" disc-specific clincher rim with 36 spoke holes. Fitment depends on your hub spacing, disc setup, and desired tire size. Send us your current wheel or hub specs and we'll confirm the build before you order.
No. This rim is drilled for disc brakes and has no brake track, so it's only for disc-brake wheels.
Order it, ask us about fit, or book an install at the Brooklyn shop.